Question about Suzuki SX4
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The solution is that when the oil filter is removed, oil gets on the O2 sensor and ruins it. Must cover the O2 and that keeps the oil off. To keep the check engine light off, is to replaced the O2 sensor. Problem solve. Later on sx4's they move the O2 in a different spot. I work on Suzuki cars. Don
Posted on Jul 20, 2009
problem one is the timer control for the heaters ,also check the heaters that they are working ,oil problem ? look under the rubber boot that goes over the oil switch ,pull it back and if oil under the cover renew the oil switch,these motors do suffer from heater light flashing on and i know people have spent megabucks trying to cure it ,its a fault with dash and printed circuits ,but the heaters are not coming on i know because i have driven one with the heater circuit light coming on and i had a extended light on a long wire and the heaters are not coming on ,ignore it just renew the faulty glow plugs,as for EGR valve just pull teh vacumn pipe off the ERG valve and leave disconnect ,more hassle than its worth changing it ,you could end up with a ECU computer .Still a nice reliable motor though and economical
Posted on Jan 21, 2010
Testimonial: "Thanks for your usefull answer. Afer I stop the engine 2 times from EGR valve, both board alarms have been reseted. What does it mean? Thanks again."
My light in my 2007 SX4 just came on. Apparently my oxygen sensor is wrecked... allegedly from oil dropping on it during oil changes. Did the light come on after the most recent oil change?
Posted on Jun 26, 2010
In addition to Don's comments above, here is a little more information. The 'lock' feature manually engages the all-wheel drive at low speeds only (less than 50 kmh, or 30 mph). It is intended for use in situations like deep snow which you need to drive through at low, preferably steady speeds, where extra torque to the wheels is required. Most of the time, I just leave mine set to 'Auto', which as Don says engages the all-wheel drive only when the onboard computer detects one or more wheels starting to slip on the road. Once control is regained this will automatically revert to front-wheel drive only. This is a great feature! I suggest driving with this switch in 'Auto' all the time. It will not adversely affect your gas milage, unless you are driving agressively on slippery roads a lot.
Jeff - 2008 Suzuki SX4 AWD owner.
Posted on Oct 30, 2011
Tips for a great answer:
Apr 15, 2016 | Hyundai Cars & Trucks
Aug 12, 2015 | Suzuki Cars & Trucks
Jun 08, 2014 | 2007 Suzuki SX4
Apr 23, 2014 | 2007 Suzuki SX4
Nov 28, 2013 | 1996 Suzuki Swift
Jun 29, 2013 | 2009 Suzuki SX4 2.0
Feb 15, 2013 | 2008 Suzuki SX4
Dec 28, 2012 | 2008 Suzuki SX4
Jul 30, 2011 | Suzuki SX4 Cars & Trucks
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: