Question about Volkswagen Golf

Open Question

I have a golf velocity 2007 model.rear brake shoes replaced.how do i set brakes and handbreak,?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 17 Answers

SOURCE: rear brake replacement

ok listen to me closely! There is an adjuster on ford aspires i cant remember if its the top or bottom but you will see the part im talking about. This piece sits directly between the brake shoes. This has been adjusted out and made longer which is normal with worn shoes! You need to twist the adjuster all the way in with new brake shoes. This part your gonna be looking for has a little round wheel on it with tiny little jaggers all the way around that wheel. It is made this way so that once it gets where its suppose to be it cant back off. Self adjusters is what you need to be looking for so if you cant find on your car google it "self adjusters for rear brake shoes" that will fix you right up, just remember run that little feller all the way in. Then that brake drum will slide right on there for ya

Posted on Sep 14, 2008

Ad
  • 74 Answers

SOURCE: 2001 suzukie vitara , 4 door model, rear brakes

need new emergency /park brake cable

Posted on Sep 24, 2008

  • 5 Answers

SOURCE: replace rear brakes adjust handbrake

The hand brake hardly ever needs ajusting. See your hand brake mechanincly spreads your rear brake shose inside the drum. Therefore just replace your rear shoes and make sure there ajusted right and you should have no more problems with that part of your car. PS make sure you put some 3M paste on the contact points on your backing plate to avoid a squeak in the near future.

Posted on May 16, 2009

ourhowse
  • 2007 Answers

SOURCE: no brakes, relaced rear brake shoes. abs, and brake lights still

Replace master cylinder.

Posted on Jun 19, 2009

  • 111 Answers

SOURCE: replacing rear brake shoes on 2007 silverado 4WD

when you pull the hub off take a picture of the brakes so you can see all the parts, so you can tell where everthing goes back together.

Posted on Feb 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i adjust hand break new shoes fitted on a smart for two hand break lever is all the way uo ?


Adjusting the Hand Brake is quite easy

At the bottom of the Hand Brake Lever , you will see the cable with like nuts (teeth) on the cable locked by the lock on the lever it self, you will need to open the lock , take the cable off the lock , drop the handle down and put the cable back on the lever and lock it.

That is how the hand brake is adjusted on the Smart car 2002 model
26129038-f35synmq1vv1efae4phsccdh-4-0.jpg

Mar 14, 2016 | Smart Cars & Trucks

1 Answer

Handbreak no longer holding


does the hand brake pull up ? if so then needs adjusting or the rear pads/shoes need replacing , always best to include vehicle make and model for a more concise answer

Oct 20, 2014 | Cars & Trucks

1 Answer

How to remove and clean and replace the rear brakes on a 2008Toyota yaris


REMOVING REAR BRAKE DRUM SUB-ASSEMBLY
1. Release the parking brake and remove the rear
brake drum.
If the rear brake drum cannot be removed easily,
do the following:-
2.Remove the hole rubber and insert a screwdriver
through the hole into the backing plate, and hold the
automatic adjust lever away from the adjuster.
3.Using another screwdriver, contract the brake shoe
by turning the adjuster.
4. Take out the brake drum from the flange.
5. remove the shoe hold down spring cup, shoe hold down spring, pin and front side brake shoe.
6. Remove the tension spring. Remove the shoe return spring from the rear brake shoe and remove the parking brake shoe strut set.
7. Remove the shoe holding spring cup, shoe hold spring, pin and rear brake shoe.
8. separate the parking brake cable.
9. Remove the automatic adjust lever tension spring and remove the automatic adjust lever.
10. remove the C-washer and remove the parking brake shoe lever.
NOTE: Do not use any solvent like gasoline to wash the brake parts.
Always wear safety goggles and mask before using compressed air.



Dec 28, 2013 | Cars & Trucks

1 Answer

My brakes don't calibrate on their own, therefore they make a squeaking sound when I break how do I fix it


Check rear brakes for:
1. Brake shoe (Cracked or distorted)
2. Installation bolt (Loose)
3. Rear brake drum (Scored)
4. Brake shoe (Dirty).
5. Brake shoe (Glazed)
6. Tension or return spring (Faulty)
7. Anti-squeal shim (Damaged)
8. Shoe hold down spring (Damaged).
6. Apply a thin layer of multipurpose grease on the area between the back plate and the brake shoes by slightly pulling off the shoes with the help of a screw driver.

Jun 27, 2012 | 2007 Toyota Yaris

1 Answer

What's your problem? Replacement of rear brake shoes


I am sorry but we have no diagrams of the brakes of any kind. Please try YouTube, it is a great source of help with these types of jobs.

Jun 06, 2012 | Volkswagen Golf Cars & Trucks

2 Answers

How do i take off the brake drums on a 2003 chevy cavalier


After you remove the tire, the drim should slide off. If it doesn't then try using a rubber mallet and gently tap on the outside edge as you pull on it. Sometimes you also need to tap on the drum in the center part. I have sprayed penetrating lubes like WD-40 or PB Blaster into the seam at the center. You may also have to back off the parking brake cable or even use the adjuster to back off the shoes.

Jan 27, 2011 | 2003 Chevrolet Cavalier

1 Answer

Replacing rear brake pads 1994 VW Golf, - process of please how to release hydraulic cylinder and hand brake mechanism to enable new pads to be fitted


YOU HAVE TO TO USE LARGE C CLAMP AND OLD INNER BRAKE SHOE OPEN BLEEDER SCREW A LITTLE COMPRESS PISTON BACK IN CALIPER BORE WITH C CLAMP AND INNER BRAKE SHOE.THEN TIGHTEN BACK UP CALIPER BLEEDER SCREW.WHEN BRAKE WORK DONE BLEED BRAKES.MAKE SURE YOU HAVE GOOD FIRM SOLID BRAKING BEFORE DRIVING THE VECHICLE.

Oct 30, 2010 | Volkswagen GLI Cars & Trucks

1 Answer

Replacing rear brake shoes on 2007 silverado 4WD


when you pull the hub off take a picture of the brakes so you can see all the parts, so you can tell where everthing goes back together.

Feb 13, 2010 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

I need a schematic for the rear brakes on an F150 super cab with 4.6L automatic trans 4wheel drive


Drum, Rear Brake System Standard Rear Brake
9969082.gif
Item Part Number Description 1 2069 Brake Shoe Hold-Down Spring Pin 2 — Rear Wheel Cylinder Retaining Bolt (2 Req'd) 3 — Washer (2 Req'd) 4 — Anchor Pin (Part of 2211) 5 — Wheel Cylinder 6 2028 Brake Shoe Anchor Pin Guide Plate 7 2A637 Parking Brake Lever 8 2296 Brake Shoe Retracting Spring (Short) 9 2296 Brake Shoe Retracting Spring (Long) 10 2200 Rear Brake Shoe and Lining (Secondary) 11 — Washer 12 2106 Parking Brake Lever Pin Retainer 13 — Brake Shoe Adjusting Lever Cable Guide 14 2A642 Primary Brake Shoe Parking Brake Lever Link 15 2A601 Parking Brake Link Spring 16 2068 Brake Shoe Hold-Down Spring 17 2A176 Brake Shoe Adjusting Lever 18 2048 Brake Shoe Adjusting Screw Socket 19 2047 Brake Shoe Adjusting Screw Nut 20 2041 Brake Adjusting Screw 21 2049 Brake Shoe Adjusting Screw Spring 22 2200 Rear Brake Shoe and Lining (Primary) 23 2A178 Brake Shoe Adjusting Lever Cable 24 2211 Brake Backing Plate
Heavy Duty Rear Brake
6dcb5d2.gif
Item Part Number Description 1 — Rear Wheel Cylinder Retaining Bolt 2 00538 Lock Nut 3 2212 Rear Brake Backing Plate 4 2262 Rear Wheel Cylinder 5 2A642 Primary Brake Shoe Parking Brake Lever Link 6 2A601 Parking Brake Link Spring 7 2A637 Parking Brake Lever 8 2106 Parking Brake Lever Pin Retainer 9 — Parking Brake Lever Bolt 10 — Secondary Shoe Assembly 11 2A179 Brake Shoe Adjusting Lever Cable Guide 12 2068 Brake Shoe Hold-Down Spring 13 — Adjusting Lever Pin 14 — Adjusting Lever Return Spring 15 2A176 Brake Shoe Adjusting Lever 16 2047 Brake Shoe Adjusting Screw Nut 17 2049 Brake Shoe Adjusting Screw Spring 18 2041 Brake Adjuster Screw 19 — Primary Shoe Assembly 20 2068 Brake Shoe Hold-Down Spring 21 2200 Rear Brake Shoe and Lining 22 2035 Brake Shoe Retracting Spring 23 2A178 Brake Shoe Adjusting Lever Cable 24 2092 Brake Adjusting Hole Cover 25 2069 Brake Shoe Hold-Down Spring Pin
The rear drum brakes:
  • Have internal shoes that expand against the brake drum (1126).
  • Are a single-anchor type.
  • Are actuated by one rear wheel cylinder (2262).
  • Have two pistons in the rear wheel cylinder (2261). One exerts force against the upper end of the primary shoe; the other exerts force against the upper end of the secondary shoe.
  • Adjust rear brake shoes and linings (2200) automatically.
  • Need manual brake adjustment if the adjusters are not operating properly or after the rear brake shoes and linings have been replaced.
When the brake pedal is applied, hydraulic fluid pressure forces the pistons in the rear wheel cylinder outward, moving the rear brake shoes and linings against the brake drum.
The rear drum brake system includes the parking brake mechanism. Refer to Section 206-05 .

Apr 04, 2009 | 1997 Ford F150 Regular Cab

2 Answers

REAR BRAKES


i think your aware of how to change the brakes if im right and your problem is the rusted drum doesnt want to come off the only way to get the old drum off is to remove adjuster plug from behind drum dustshield and adjust the shoes so that there not even close to the braking area of the drum then try and wiggle the drum off of the assembly if it is not coming off then you need to use the old nylon hammer on the drum and i mean you must hit the drum from side to side trying by hand to wiggle the drum off its a tight fit and you need to strike the drum on the face not on the fins not wanting to damage with persistance and care and patience you will eventually be able to remove the drum to service brakes take care and good luck with it

Jul 01, 2008 | 2007 Dodge Caliber SXT Sport Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...