Question about Cars & Trucks

Open Question

Bug identification for household inside

Small oval shape with 2 feelers in front they pop when stepped on light gray with black spots.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy engine block identification numbers V0710FSC TEJ528846


Small Block Chevy Engine Block casting and code identification

www.nastyz28.com/sbchevy/sblock.html
Sep 14, 2012 - Small Block Chevy engine identification. Code identification, Casting Number info.

Chevy Casting Number identification - Block casting numbers

outintheshop.com/faq/casting/castings2.html Chevy Casting Number identification including Block casting numbers, cylinder ... 2-bolt Chevy II Nova Recessed filter .... 2 & 4-Bolt Mexico cast Crate engine.

Reference: Chevy Engine Block Casting Numbers - Chevy ********

www.chevyhardcore.com/news/reference-chevy-engine-block-casting-numbers/ Sep 19, 2013 - The engine block casting number for both BBC and SBC engines is found at the back of the block where the transmission mounts to the engine.

Chevy Identification Numbers - 73-87.com

www.73-87.com/chevy_ids/sbcid2.htm If you have a small block Chevy engine, and need to identify any parts you have laying around, or maybe the engine that is in your truck, I think you will find the ...

Chevrolet - Browse - Casting Numbers .info: engine blocks, heads ...

www.castingnumbers.info/site/browse/m/chevrolet 12562932, Category: Cylinder Heads Type: Big Block V8 Date: 1991-1995. Notes: oval port, open chamber, Gen.V, truck crate motor, 118cc chambers gm chevy ...
http://outintheshop.com/faq/casting/castings2.html

Jul 04, 2017 | Cars & Trucks

2 Answers

Since moving in to a senior living facility i see tiny oval in shape black bugs. my 2


Bugs; First thing would be to try some Frontline II on them, it that doesn't work, you can take them to the vet to find out exactly what they are, but it sounds like fleas.

May 02, 2016 | Cars & Trucks

1 Answer

Chevy equinox. Location power door lock relays .i dp not see them


On the engine fuse and relays box facen towards the car front and counting from left to right you have 1 big gray 2 small gray 3 ********* 4 big gray now from the 4th big gray you count vertically from back to front 1. the 4th big gray that we mentioned before 2. small gray 3. small gray 4 small gray the 3rd small gray (the middle of the 3 vertical small gray relays) is what you need :)

Apr 25, 2016 | Cars & Trucks

1 Answer

Where is the DRL module on a 1999 Ford Ranger


Hi Russell,
The DRL ( daytime running lights) module will be one of two styles . (1) an oval shaped electrical connector with 5 or 6 wires ( not sure- I have a 2000 sport with the other style ) or ( 2) a square shaped connector with 6 wires. The module itself is about 3"x 4" for the oldstyle ( oval) and about 3" x 3" for the new style.

May 08, 2014 | Ford Ranger Cars & Trucks

1 Answer

How to repair center console lights Shifter lights burned out how do i remove to replace bulbs


driver side of the shift console slide the driver seat back you will see an oval cover pry it out with a small screw driver look inside you will see a black electrical fitting with two blue wires use a long needle nose pliers to gently turn and lower the light fixture(black electrical fitting with two blue wires) pull out of the oval opening change the bulb and reverse the operation no console removal needed..

Oct 28, 2011 | 2008 Chevrolet Aveo

1 Answer

Is there a step by step instruction on how to change the left side mirror on my Mitsubishi Endeavor 04 ? thank you


Maybe try alldata.com, because on my online resource for the 2004 Mitsubishi Endeavor, there is no information on body work.

One could get the part from the salvage yard and look for the bolts like one would do for a GM car

One may have to remove some plastic parts to get at the fasteners.

Also, if there are cables for moving the mirror from the inside, then that should be considered, as well.

Also, if the mirror is heated, that should be considered.
---
(I got this off of Wiki Answers)
Very easily. Open the door, find two rubber circular boots right behind the
mirror. Take them off to expose the 2 bolts that hold the mirror on. Take the
bolts out and unplug the wire. Reverse these steps to install, hole this
helps...

There are three small bolts holding the driver's side mirror on. Two can be
accessed by opening door and removing the two circular rubber boots seen on the
upper end of the door . To access the third bolt you will need to remove the
door panel. you will need a forked driver to help remove the door panel. It can
be bought at any auto parts store. It has a flat Y shaped head that can be
inserted along the lateral and bottom edge of the door panel to pop it way from
the door frame. There are three screws holding the door panel on. Two under the
door handle and one behind the door latch. Then the door lifts up and off. Make
sure you have the window down before you take the panel off because you cannot
access the third bolt unless it is. You will have to unplug the electrical
connects that power the controls on the door handle to completely remove the
door panel. After you remove the panel there will be a hole in the upper right
hand door frame, possibly covered by a black patch. Beneath this is the third
bolt. you will also need to disconnect the light from inside the door frame
before you will be able pull the mirror off. There is a large rubber boot oval
shaped that you can pull out and you will see the electrical connection for the
mirror inside the hole on the right.


Good luck on this repair.

Oct 07, 2010 | 2004 Mitsubishi Endeavor

1 Answer

Hi, my passenger side window dropped down and i can't remove the panel to fix it. Can you tell me how to remove the inside door panel please.


Under the door handle there's an oval-shaped cover. Remove it and unscrew the two screws hidden under it/
Remove the red light lens on the corner and unscrew the screw hiding there.
Slowly but firmly, pull on the far side corner - where you removed the red lens. It should pop out. Following the line of the under side of the panel - pop out the panel as you go.
Lift up ane there you go - here's the window!!!

Good luck!

Jul 11, 2009 | 2002 Oldsmobile Alero

2 Answers

Where and how to change cabin filter chevy equinox


Hiya...the cabin air filter is located below the front passenger/windshield area.
It's only accessible by standing outside the Equinox with the hood open.
Here's how to do it...(before you pop open the hood)

1) Stand outside at the front-right door area.
2) Just below the front windshield area, pull up a few small black plastic clips that's on the black windshield wiper cowl area- a small flat screwdriver or a special clip-remover tool is handy.
3) Raise the hood up.
4) There may be a triangular-shaped hard foam sound damper at the left side nearby the hood hinge...pull it off if it allow you to work around it with ease.
5) Continue to find a few black plastic clips around the black windshield wiper cowl area.
6) Gently pull up the black windshield wiper cowl cover with care not to bend it too hard during removal.
7) You should see the cabin air filter inside that's held in place by a black rectangular box inside.
8) There's 2 black tabs that holds the cabin air filter in place.
9) Insert your finger or tool to pry the cabin air filter away from the tabs.
10) Remove old cabin air filter.

Remember to reinstall the clip parts back into place when you're finished.

Apr 01, 2009 | 2005 Chevrolet Equinox

2 Answers

AC display panel lights


You will need to replace the whole in-dash A/C control unit. Changing the small bulb won't rectify your problem, as the display is LCD.

Mar 12, 2009 | 2001 Chrysler 300M

2 Answers

How to Fit a Cabin Filter


Hiya...the cabin air filter is located below the front passenger/windshield area.
It's only accessible by standing outside the Equinox with the hood open.
Here's how to do it...(before you pop open the hood)

1) Stand outside at the front-right door area.
2) Just below the front windshield area, pull up a few small black plastic clips that's on the black windshield wiper cowl area- a small flat screwdriver or a special clip-remover tool is handy.
3) Raise the hood up.
4) There may be a triangular-shaped hard foam sound damper at the left side nearby the hood hinge...pull it off if it allow you to work around it with ease.
5) Continue to find a few black plastic clips around the black windshield wiper cowl area.
6) Gently pull up the black windshield wiper cowl cover with care not to bend it too hard during removal.
7) You should see the cabin air filter inside that's held in place by a black rectangular box inside.
8) There's 2 black tabs that holds the cabin air filter in place.
9) Insert your finger or tool to pry the cabin air filter away from the tabs.
10) Remove old cabin air filter.

Remember to reinstall the clip parts back into place when you're finished.

Nov 12, 2008 | 2006 Chevrolet Equinox

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...