Question about 2004 Mazda 6

2 Answers

I have a Mazda 6 04, and both of my keyless remotes are not working , mazda says that it may be the reciever on the car, but for the diagnosis mazda wants to charge me 99.00 . How much will a reciever for that car will cost??

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi there, I have 04 mazda 6 also. this problem happened to me. I have electrical experiance so opened up the remote on the key ring. What I found was the small microswitch had liberated from the circuit board. The microswitch is about 4 by 6mm rectangle. I mounted cuircit board in vice and soldered (carefully) the switch back to the board. This worked perfectly. Any electrcian or appliance repair person could do this. The mazda dealer here wanted $300 to replace remote. I hope this helps.

Posted on Jul 28, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 144 Answers

Take both of your remotes to a parts house and they will check them for free at the battery display. If the remotes are good I would go to Best Buy and see what they suggest, new alarm,ect. I know it will be cheaper than mazda.

Posted on Jul 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I use a 4button keyless remote to replace a 3 button keyless remote


Hi,
Is the 3-button remote from Mazda too? If it is and it's from the same year range as your MPV it may work. In other words, many car makers used the same type of keyless remotes on all their vehicles in a given year range. But if the 3-button is much newer or older you're probably out of luck. You can search on Ebay to see what types of remotes were sold for your year car.

If this is NOT a Mazda remote and neither was the 4 button they may use a different frequency (think 'radio station') and won't 'talk' to the car's keyless remote compuer.

TD

Oct 29, 2014 | 2003 Mazda MPV

1 Answer

How do you program a 2009 mazda 6 push button start remote so i dont need to use the key no more?


how do you program new keyless entry for push button start on 2009 mazda 6?

Jan 16, 2012 | 2009 Mazda MAZDA6

2 Answers

How do I replace a battery for a Mazda CX 9 keyless remote? I don't know how to get the old battery out.


a flat head should be all you need to pop open the remote and re place the battery

Feb 03, 2011 | 2008 Mazda Cx 9

1 Answer

Keyless entry not working


Programming
When
Remote control added or replaced. System malfunction.
How
Obtain all remote controls. Remove key from ignition switch. Close all doors. Open driver's door. Carry out the following within 24 seconds: Turn ignition switch ON and back to LOCK position 3 times. Remove key. Press and release driver's door courtesy light switch 3 times. Ensure doors lock and unlock. If not, wait 40 seconds and repeat procedure starting with driver's door already open. Press each remote control lock or unlock button twice. Ensure doors lock and unlock after each remote control operation. If not, proceed as follows: Press and release driver's door courtesy light switch once. Ensure doors lock and unlock twice. Repeat procedure starting with driver's door already open.
NOTE: A maximum of 3 remote controls can be programmed.

Mar 29, 2010 | 2004 Mazda 6

1 Answer

Whats wrong with my car remotes? 2003 mazda 6


sounds like keyless entry module failure or PJB box failure wiring check required

Oct 20, 2009 | 2003 Mazda Mazda6

2 Answers

Program keyless entry for mazda rx8


its a dealership and computer job by them, you cant do it yourself

Jul 10, 2009 | 2004 Mazda RX-8

1 Answer

Keyless remote not as sensitive as before


yes this would most lkely be the battery, most remotes just snap apart or have a tiny screw in them, it varies, but snap apart is most common.

Apr 07, 2009 | 2001 Mazda MPV

3 Answers

Keyless entry remote


there should be a black box under the dash assosiated to the keyless entry you need to open it and there should be two pins next to each other you need to arc them together with a screwdriver you should see the blinkers flash then without releasing the screw driver press the button on the remote pad repeat this for the other remote

Jun 22, 2008 | 2006 Mazda 5

Not finding what you are looking for?
2004 Mazda 6 Logo

796 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...