Question about Mitsubishi Galant

Open Question

I need a diagram for the EGR System for a 2009 mit galant 2.4 16 valve and a picture of where it is located under the hood of the car. i have an po401 code engine light on check gas cap already.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 72 Answers

SOURCE: EGR Valve replacement and Check engine light

Error code will have to be cleared. The way that cars know when to turn on the check engine light is that there is a recurring error for "x" miles or time, as long as that error exists in it's memory most cars will continue displaying the check engine light.

Posted on Dec 02, 2009

Ad
Mustgo
  • 2359 Answers

SOURCE: po401 and po420 (95 toyota previa Van super charged engine)

Check for air leak into system after MAF.

Check for

vacuum leaks on intake manifold,

the air tube between the air filter.

intake manifold vacuum hose.

===
clean throttle plate with Berryman carburator cleaner

SEE sample picture HERE
===


Check for loose or no connected vacuum hose(s).


Take it for a test drive.


Please rate my answer if it's useful to you.


Cheers,

Mustgo

Posted on Dec 19, 2009

  • 262 Answers

SOURCE: 97 isuzu rodeo, check engine light with po401 code

DPFE is a reasonable concern. There is also a very thin tube from the EGR to the DPFE that plugs up with carbon. Check the tube prior to the DPFE.

Posted on Feb 24, 2010

  • 8 Answers

SOURCE: Need a pic veiw of 2004 ford f350 6.0L diesel EGR

1st of all when Ford started out with putting "EGR's" on those diesel engines, they rushed it and are nothing less than a pain in the ***! i recommend having an EGR cleaning service performed by your local Ford dealer, i know they charge up the wazoo, but they're the best people to perform the service period.this is a VERY common problem with those engines and that service is "supposed" to be performed every 30K I believe. i dont recommend attempting to remove and service it youself, this WILL only make it worse.

Posted on Mar 26, 2010

Testimonial: "Im relieved to here that someone else is thinking the same thing. Im still going to try it myself as i am somewhat skilled at this but Thanks a bunch!"

  • 2006 Answers

SOURCE: 2006 Ford Fusion 2.3L I4 Engine Check engine light

Common Problems That Trigger the P0455 Code

  • Defective or damaged fuel cap
  • Distorted or damaged Fuel Tank Filler Neck
  • Small tear or puncture in the Evaporative system hose(s) and/or Carbon Canister
  • Defective Fuel Tank Sending Unit gasket or seal
  • Small split in a seam of the Carbon Canister
  • Defective Evaporative Vent Valve and/or Evaporative Purge Valve
  • Defective or damaged Fuel Tank
  • Defective Fuel Tank Pressure Sensor
  • Defective Leak Detection Pump
  • Slightly loose and/or worn clamps or hardened O-rings anywhere in the EVAP system
Common Misdiagnoses
  • Fuel cap
  • Evaporative Purge Valve
  • Evaporative Vent Valve

This is a link to a Ford Motor Company PDF file that explains this fault in great detail and is worth reading and studying.
.
http://www.motorcraftservice.com/vdirs/diagnostics/pdf/OBDSM601.pdf

Posted on Jun 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the egr valve on a citizen c5


  • First you want to open up the hood of your car
  • Find the engine diagram sticker on the inside of the open hood and identify the mechanism that is labeled "EGR Solenoid" on the sticker.
  • Find the "vacuum line" on the sticker diagram and identify its color. This is the line that runs from the EGR solenoid to the EGR valve.
  • Locate the vacuum line inside the engine compartment of the vehicle toward the front of the driver's side. The vacuum line will be the same color on the vehicle as it is on the diagram.
  • Follow the vacuum line from the front of the vehicle where it connects to the EGR solenoid through the conduit that carries it to the EGR valve at the rear of the engine compartment. The easiest way is to track the uniquely colored vacuum line along the path between its two connection points. The vacuum line connects to the EGR valve, which is the disk-shaped object located at the rear of the engine compartment
    on the driver's side.

May 04, 2016 | Cars & Trucks

1 Answer

Need vacuum diagram for EGR valve on 351 Windsor engine


The diagram is under the hood on the Federal Emission Label

Oct 03, 2012 | 1987 Ford F 150

1 Answer

Why would water leak when running ac 02 mits galant


Ur evaporator drain tube is plugged it usually located under the hood passenger side fire wall use a piece of a coat hanger to get in there and un plugg it or compressed air will work to

Jul 23, 2012 | 2002 Mitsubishi Galant

1 Answer

Location of knock sensor and digital egr on 3800 engine because it failed nox test. need to replace


Hi,

Improve the Fixya.com experience for everyone by voting!

Your knock sensor on your 3.8 litre engine is under the hood, passenger side, rear engine area, below exhaust manifold, mounted in engine block.

[I'm not alloted enough space to show you a picture of the knock sensor]




Your EGR valve is located under the hood, center, driver side, mounted on upper center driver side of engine
[I'm not alloted enough space to show you a picture of the GR valve]
All the best,

Ben

Jun 24, 2011 | 1992 Buick Regal

1 Answer

1996 gmc sonoma 2.2 engine


For 1996 GMC Truck Sonoma 2WD 2.2L SFI OHV 4cyl
The EGR Valve is located under hood, center, rear engine area, mounted top rear driver side of engine.

c30f299.jpg

Fig. 11: Unfasten the EGR valve retaining bolts...


b24c0c0.jpg


Fig. 12: ...then remove the EGR valve from the vehicle


I really hope help with this (remember rated and comment this post).


Mar 10, 2010 | 1996 GMC Sonoma

1 Answer

Auto Mits Legnum vr4 when put into drive or reverse engine shuts down. Is idling below normal. Neutral is just under the 1 but as soon as put into gear idle drops to zero.


Could be many things. Bad torqe convertor, bad idle air control valve, bad egr valve. So many things it could be. Id spend 60 bucks to get it diagnosed that way your not throwing needless parts at it. Hope this helps

Nov 21, 2009 | 1994 Mitsubishi Galant

2 Answers

SEL code P0401 (2004 Mitsubishi Galant 2.4L)


Check for

vacuum leaks on intake manifold,

the air tube between the air filter.

intake manifold vacuum hose.

===
clean throttle plate with Berryman carburator cleaner

SEE sample picture HERE
===

Also remove carbon built up behind the EGR valve and the EGR passage tube.

===

Vacuum leak WILL offset the intended 14.7 to 1 air fuel ratio.

More un-metered air (leaks) will lean out the fuel mixture.

Use small amount of Berryman carb clearer at potential air leak area will help you identify trouble spot.

At idle,just spray and listen for the RPM surge.

The in-rush of carb clearer will increase the RPM on the motor.

Record the problem spot(s) and address it later.

===

EGR carbon built up require 2+ hours to clean from start to finish.

You will need a new EGR base gasket before your start.

Locate and remove the EGR valve after the vehicle is cool down.

Carefully record the connector and vacuum line (for older vehicle) location by drawing an easily to follow diagram.

Remove the EGR valve.

Inspect the location of the carbon built-up inside the valve and the EGR passage tube.

SOAK these areas with WD-40 spary.

You will need a small screwdriver,cloth hanger and lot of newspaper and time to get this cleaning done right.

RE-SOAK the carbon and let it sit for over-night will also help.

One the last round,pass a shop vacuum of the EGR valve and the passage pipe.

Install the new EGR gasket and connectors.

Allow the vehicle to warm up outdoor to burn up any remaining WD-40.


Take it for a test drive.


Please rate my answer if it's useful to you.


Cheers,

Mustgo

Sep 22, 2009 | 2004 Mitsubishi Galant

1 Answer

How to change a egr valve in a Mitsubishi Galant the car is 95 and took it in to dealership and it was diagnosed as code 43 egr valve, just need to know where this is located and how to take out and...


Should be close to your throttle body, usually held by 2 big screws, disconnect the hose coming from egr valve, and replace with a new one, dont lose the gasket.

Jul 08, 2009 | 1995 Mitsubishi Galant

1 Answer

Where is the EGR Valve located on a 2004 Galant with a 2.4?


It is on the firewall just behind the engine, to replace it you need to detach the vacuum hose, remove the two EGR valve mounting bolts, remove the EGR valve from the intake manifold and then put in the new one.

Thanks for using FixYa - a good rating is appreciated for answering your FREE question.



Jul 08, 2009 | 2004 Mitsubishi Galant

1 Answer

Bad egr valve


the egr valve is located at the end of an exhaust supply pipe (1/2" diameter) from the exhaust manifold. there is also a sticker under the hood that shows this location, it is the emissions sticker.

Mar 23, 2009 | 2004 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...