Question about 2003 Cadillac CTS
Hi these are mis-fire codes ,
P0300 is a general mis-fire detected code the others relate to specific cylinders,
P0302 is cylinder 2 misfire
I would check your spark plugs first if Ok you need to make sure the coils are working ok for this you need an osciloscope to check output voltage if your not sure then take to a qualified mechanic with Cadilac experience it could be caused by an air leak,bad ECT sensor or even Mass air flow sensor ,codes only tell you the result not the cause
Posted on Jul 24, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Apr 04, 2016 | 2005 Mercury Sable
Nov 05, 2013 | Cars & Trucks
Dec 23, 2012 | Cars & Trucks
PO171 OBD2 Code basically this means that an oxygen sensor in bank 1 has detected a lean condition (too much oxygen in the exhaust). On V6/V8/V10 engines, Bank 1 is the side of the engine that has cylinder #1. The P0171 is one of the more common trouble codes.
his code is triggered by the first downstream (front) O2 sensor. The sensor provides a reading of the air:fuel ratio leaving the engine's cylinders, and the vehicles powertrain/engine control module (PCM/ECM) uses that reading and adjusts to keep the engine running at that optimum ratio of 14.7:1. If something is not right and the PCM cannot maintain the 14.7:1 ratio, but rather there is too much air, it triggers this code.
Nov 06, 2012 | 1997 Toyota Camry
May 10, 2010 | BMW 750 Cars & Trucks
Mar 31, 2010 | 2006 Kia Sorento
Sep 17, 2009 | 2002 Dodge Dakota Club Cab
Jan 23, 2009 | 1999 Toyota Camry Solara
Aug 03, 2008 | Hyundai Sonata Cars & Trucks
1,310 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: