Question about Cars & Trucks

1 Answer

Where in Tampa to take 2005 caddy deville to get air actuator installed, I have the part. thanks

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 2,278 Answers

Suggest you find a telephone directory and start calling garages in your area and ask them your question.
Be certain to ask them how much they will charge you, and ask twice or more.
Once when you call, and then a couple more times when you take it to them BEFORE they start to work.
Understand that garages make money on their labor and on the parts they sell you.
If you have your own part, some may refuse to work with you, particularly if that part is used.
God bless your efforts.

Posted on Apr 18, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 05 caddie devill rear shock is frozen in the up position


This are most likely air shocks. Is it a DTS? Those have air. They have a level indicator that tells the compressor where to stop at proper height. I would assume this is broken or sticking. If it is a regular shock, it will need replacing.

Feb 22, 2015 | 2005 Cadillac Deville

1 Answer

05 Caddy deville AC blowing cold on Driver side, Heat on passenger side


Either your Climate Control has gone bad or

The Mixing Doors Motor has....

Apr 05, 2013 | 2005 Cadillac Deville

1 Answer

Air actuator


blend door acuator

Jun 06, 2012 | 2005 Cadillac Deville

1 Answer

Temp light flashes when car start up. turn on heater and blows cold air on passenger side, and barely warm on driver side. No blowing air from defroster. Will work occasionally but usually it is this...


Air Door Actuators/Motors Removal & Installation Recirculation Actuator 1996 - 1999 1996 - 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the left sound insulator panel.
  2. Disconnect the vacuum hose from the recirculation actuator.
  3. Remove the recirculation actuator from the valve.
To Install:
  1. Connect the recirculation actuator to the valve.
  2. Clip the recirculation actuator to the air inlet.
  3. Connect the vacuum hose to the recirculation actuator.
  4. Install the left sound insulator panel.
2000 - 2005 2000 - 2005 Recirculation Actuator gm-10-00-1559.gif

To Remove:
  1. Remove the instrument panel compartment.
  2. Remove the right sound insulator.
  3. Remove the dash integration module from the bracket.
  4. Remove the 2 dash integration module bracket fasteners and position the bracket to gain access to the recirculation actuator.
  5. Disconnect the electrical connector from the recirculation actuator.
  6. Remove the recirculation actuator.
To Install:
  1. Install the recirculation actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  2. Connect the electrical connector to the recirculation actuator.
  3. Install the dash integration module bracket and torque the fasteners to 12 in-lbs (1.4 Nm).
  4. Install the dash integration module into the bracket.
  5. Install the right sound insulator.
  6. Install the instrument panel compartment.
  7. Recalibrate the actuator.
Defroster Valve Actuator 1996 - 1999 1996 - 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the air distributor assembly.
  2. Unclip the defroster valve actuator from the air inlet.
  3. Disconnect the defroster valve actuator from the valve.
To Install:
  1. Disconnect the defroster valve actuator from the valve.
  2. Clip the defroster valve actuator from the air inlet.
  3. Install the air distributor assembly.
Heater/Bi-Level Actuator 1996 - 1999 1996 - 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the air distributor assembly.
  2. Remove the clip and the screws that fasten the 2 halves of the air distributor assembly and separate the air distributor assembly.
  3. Unclip and disconnect the heater/bi-level actuator from the valve.
To Install:
  1. Connect and clip the heater/bi-level actuator to the valve.
  2. Fasten the 2 halves of the air distributor assembly together and torque the fasteners to 13 in-lbs (1.5 Nm).
  3. Install the air distributor assembly.
Temperature Actuator 1996 - 1999 1996 - 1999 HVAC Actuators gm-10-00-1840.gif

To Remove:
  1. Remove the instrument panel assembly.
  2. By snapping the rod out of the valve, remove the temperature valve link rod from the temperature valve.
  3. Disconnect the electrical connector from the temperature actuator.
  4. Remove the temperature actuator.
To Install:
  1. Install the temperature actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  2. Connect the electrical connector to the temperature actuator.
  3. Start the vehicle.
  4. Set the fan to position to high.
  5. Set the temperature to full hot.
  6. Allow a minimum of 45 seconds for the temperature valve actuator to move to the full hot position.
  7. Move the temperature valve to the full hot position.
  8. Snap the temperature valve link rod into the temperature valve.
  9. Install the instrument panel assembly.
Mode Actuator 2000 - 2005 Mode and Left Air Temperature Actuator gm-10-00-1560.gif

To Remove:
  1. Remove the left side sound insulator panel.
  2. Remove the knee bolster.
  3. Remove the instrument panel cluster. (Automatic HVAC)
  4. Disconnect the electrical connector from the left air temperature actuator. (Automatic HVAC)
  5. Remove the left air temperature actuator. (Automatic HVAC)
  6. Disconnect the electrical connector from the mode actuator.
  7. Remove the mode actuator.
To Install:
  1. Align the mode door levers with the cam slots.
  2. Install the mode actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  3. Connect the electrical connector to the mode actuator.
  4. Install the left air temperature actuator and torque the fasteners to 12 in-lbs (1.4 Nm). (Automatic HVAC)
  5. Connect the electrical connector to the left air temperature actuator. (Automatic HVAC)
  6. Install the instrument panel cluster. (Automatic HVAC)
  7. Install the knee bolster.
  8. Install the left side sound insulator panel.
  9. Recalibrate the actuators.
Left Air Temperature Actuator 2000 - 2005 Mode and Left Air Temperature Actuator gm-10-00-1560.gif

To Remove:
  1. Remove the left side sound insulator panel.
  2. Remove the knee bolster.
  3. Remove the instrument panel cluster.
  4. Disconnect the electrical connector from the left air temperature actuator.
  5. Remove the left air temperature actuator retaining screws.
  6. Remove the left air temperature actuator.
To Install:
  1. Install the left air temperature actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  2. Connect the electrical connector to the left air temperature actuator.
  3. Install the instrument panel cluster.
  4. Install the knee bolster.
  5. Install the left side sound insulator panel.
  6. Recalibrate the actuators.
Air temperature Actuator (Manual), Right Air temperature Actuator (Automatic) 2000 - 2005 Right Air Temperature Actuator gm-10-00-1561.gif

To Remove:
  1. Remove the instrument panel compartment.
  2. Disconnect the electrical connector from the air temperature actuator.
  3. Remove the right air temperature actuator.
To Install:
  1. Install the air temperature actuator and torque the fasteners to 12 in-lbs (1.4 Nm).
  2. Connect the electrical connector to the air temperature actuator.
  3. Install the instrument panel compartment.
  4. Recalibrate the actuators.
prev.gif next.gif

Nov 03, 2010 | 1998 Buick LeSabre

1 Answer

The back of my caddy sits very low how can i raise it up does the traction control have something to do with that


Does you caddy have air suspension? Your going to have to replace the rear coil springs or (Air shocks) if you have them.

Feb 24, 2010 | 1998 Cadillac DeVille

2 Answers

No heat on my 98 caddy deville delegance?


do the heater core coolant supply hoses both get hot at the firewall in the engine compartment? if yes then you have a defective temperature control blend door actuater motor.

Oct 17, 2009 | 1998 Cadillac DeVille

1 Answer

95 caddy heating and cooling preoblem


If you have no heat it could be cause by an air pocket in the cooling system and the bubbling sound could be the antifreeze boiling

Jan 12, 2009 | 1995 Cadillac DeVille

3 Answers

Blows A/C out of Drivers Side, and Heat out of Passenger Side


thts because you have actuators under the dash. its a real job to tear the dash apart, the actuator control direction/temp. bettertaking it to a caddy dealer. my guys here in the shop hatem and all they work on is caddys

thts because you have actuators under the dash. its a real job to tear the dash apart, the actuator control direction/temp. bettertaking it to a caddy dealer. my guys here in the shop hatem and all they work on is caddys

May 14, 2008 | 2006 Cadillac Escalade Esv

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...