Question about Cars & Trucks

Open Question

Parking lights, my parking lights do not seem to work, I looked for fuse & relay. but I can't seem to find which 1's they are.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 15 Answers

SOURCE: parking lights on a 91 chevy 1/2 ton pick up truck

I had the opposite problem on a 92 and 94 chevy trucks.I had park lights but no headlights and both were solved with switch itself.

Posted on Jan 17, 2009

Ad
  • 289 Answers

SOURCE: Mazda B2300 1995 - dashboard & parking lights not working

hi..the reason to this problem may be your
wiring.check the wiring kit properly.This will
solve the isssue.
try this out..
thank u..
rate me..

Posted on Feb 15, 2009

  • 840 Answers

SOURCE: No parking lights, fuse keeps blowing.

There is a ground not connected or a wire open that is causing it to blow

Posted on Mar 08, 2009

  • 436 Answers

SOURCE: No parking lights and no instrument panel back

The rio has a light control module in the left kickpanel which allows all the parking lights to work. if you remove the module and take it apart, you will notice that the soldering joints are cracked. simply resolder the connetions or just replace the unit and presto your lights will start to work again.

Posted on Aug 23, 2009

  • 3 Answers

SOURCE: No parking , fog or rear lights working.

REPLACE DRL MODULE

Posted on Sep 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my Buick Rainier parking light shut off?


What year is it ? Parking light or Parking LIGHTS

It's probably the park lamp relay in the rear fuse box , contacts stuck together ! The body control module turns on the relay after receiving a input from the headlamp switch !
The rear fuse box is located beneath the left rear seat !
30
PARK LP Relay
--
F PARK Fuse, LR PARK Fuse, RR PARK Fuse, TR PARK Fuse

Mar 24, 2015 | Buick Rainier Cars & Trucks

1 Answer

My tail lights on my 2006 Pontiac grand prix isn't working where do I look to find the fuses


tail lamp are really parking lamps after all the fronts glow and the rear, and the sidemarkers and the dash lamps all glow, with the
Headlight switch 1 click, do that all fail, up to 20 lamps.
this is key fact, and makes diagnosis far more easy.
turn dash cabin dimmer on high. too.
the fuse box i most cars they will be marked, TAIL or PARK
did you even look?
ok the schematic is on my screen,(alldata.com)
fuse j4----j5 location then to PK relay both in the IP fuse box,
IP= instrument panel.
THE BCM controls this relay
the BCM sees you turn the digital swtch to park and then closes the relay, it is that simple.

the fuse is marked PK lamps, (as in parking)

Jun 20, 2014 | Cars & Trucks

1 Answer

ELECTRICAL PROBLEMS WITH TURN SIGNALS,EMERGENCY FLASHERS,PARKING LIGHTS


this car have DRL? day light running lamps?>? option
or manditory in canada. do tell !

so the fuses blew again, and you didnt look?
id fix either park/ hazzards.first
both work with key in pockets for EMERANGACY uses, even
when 100 miles from car, keys in pocket, by DESIGN. (all cars)
so due to that fact its a very simple system.
but in 2007, they makers do all they can to make it more complex
than ever necessary, (saves money with copper)
the 2 features are hot all the time, that means they wire to the
battery directly with ONLY a fuse, to stop fires.
so id bet it blew the fuse (got trailer wiring hacks in back>?) collision damage not fixed right>?
do you have the factory trailer option?????

park seems best., easier
it has 2 fuses to the rear.
the PARK relay closes, and powers the fuse and then lamps.
so both cant blow. left and right are Fuse 7 and 9
the BCM , (body brain puter) energizes the park relay
so seems its not.
my guess is the BCM has lost power.

in the dealer they can scan for BCM errors. and say fast what is wrong.

the list for PARK dead.
1. Ineffective or missing relay. 1. Test and replace park lamp relay if required. 2. Ineffective control circuit. 2. Test and repair open park lamp relay control circuit if required. 3. Ineffective switch. 3. Test and replace multi-function switch if required. 4. Ineffective BCM inputs or outputs. 4. Use a diagnostic scan tool to test the BCM inputs and outputs. Refer to the appropriate diagnostic information.
here is my list
all park lamps burned out, (no way) but had it happen in 1980.....ask how? (alternator went nuts to 30v)
relay park missing or bad. (pray)
the park switch( in combo-mult- section switch is bad) nah.
The combo failed to tell BCM of this state change (comm fails)
the BCM failed to hear the command.
the BCM is bad or lost power (fuses)
the BCM failed to close the park relay.

the BCM has 3 power fuses. fues 34 is hot all time, id bet that fuse
allows the BCM to turn on parks, at any time.
others are key power, fuse 22, and 13. to BCM

the back unlocks doors, and does so via FOBs. car locked and parked and no key in ignition, so again, fuse 34 rears ugly head

i hang hat on 34, but got tired, if reading 50 pages of power distrabution and comms.
it is very complex car, and one of the first cars to do this....

Feb 05, 2014 | 2007 Jeep Liberty Sport

1 Answer

Right side parking lights


usa car, not Renegade or export car. nor DRL lamps.

fuse, can look good but be bad.
use any ohm meter, to make sure they are good. 0 ohms good.
the car can have park-tail relay. yes, it does have a park relay
that feeds 2 fuses (#7&9) then all lamps left and right.
the BCM controls the relay. body brain.

check voltage at all 4 pins of park relay, and bingo know who is messing up,?
pins 86/87 hot 12v all the time( battery)
87a = ground 0v all times.
30 is relay output, 12v park on.
85 pin is relay coil control. 0v park, 12v not park.
if you have 0v on 85 , in park the BCM is working

there is start.
if a fuse is blown to the BCM, it will mess up

Jan 06, 2014 | 2004 Jeep Liberty

1 Answer

My instrument pannel back light and parking lights have stopped working and can't find any bad fuses. Help!!!


Have you tried checking relays? if you find a relay related to parking lights, try swapping it with a relay of the same number if there is one in the panel. also have you check your DRL (daytime running lights) fuse relay? there are generally multiple locations for fuse/relay panels.

May 30, 2012 | 2001 Ford Focus

1 Answer

2001 F150 supercrew w/ factory towing - No tail lights on trailer


Not sure which fuse you checked.
The Engine Compartment Fuse Panel ( Battery Junction Box / BJB ) is where the fuse is for the trailer tow adapter parking lamps.
Fuse # 5 is the fuse for the parking lamps, and the reversing lamps.

Next is the trailer tow adapter park lamp relay. This is what BJB Fuse #5 feeds, and the coil is operated by the truck's parking lamps. This is also in the BJB, Relay 201, it is the 1/2 size relay.

Not sure what you took a resistance reading from on the trailer tow adapter.

If you want, you can pull the trailer tow park lamp relay, and jumper the normally open contacts, which should provide power at the trailer tow adapters, regardless of the truck's lights.
4418e16.jpg

This is the wiring diagram for the trailer tow park lamps
c2f0bcb.jpg

Mar 09, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

I just rewired my 20'deckover trailer. I used good quality lcd's. I have the 7 and 4 pin plugs. everything works but the parking lights on both plugs. I have a 2006 f-150 extended cab. bought a test plug...


Did you check the fuse for the trailer tow adapter parking lamps ? This is a separate fuse from the truck's parking lamps.
Fuse #10 is the Trailer Tow parking lamps ( via the trailer tow parking lamp relay ) and this is the same fuse for the trailer tow reversing lamps ( via the trailer tow reversing lamp relay ).

If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Diagrams for the Trailer Tow adapter :

3e4eab1.jpg

a8323b6.jpg

Feb 21, 2010 | 2006 Ford F-150

2 Answers

Blew the rear parking lights. Front parking


If they are both gone, you either have a bad ground wire or broken wire. See if you have power back there. The bulbs could be both burnt out.

Oct 15, 2009 | 1993 Mazda 929

1 Answer

Parking lights quit working 2002 dodge ram 1500


does the instrument panel lights come on when you turn on the park lights only (no headlights)? If not it could be the switch itself.

Jun 17, 2009 | 2001 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...