Question about Volvo S60
Until you diagnos what the exact problem is ---their are a few parts to that list like a wire connectior -wire harness -valve solenoid etc --need to find problem then get part
P0075 Intake Valve Control Solenoid Circuit B1 P0075 Intake Valve Control Solenoid Circuit Bank 1
Posted on Apr 18, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
THE 445 IS THE EVAP PURGE VALVE IT MAY BE BAD BOTH 446 IS SAME VAVLE YOU NEED TO SEE IF THE HOSE ARE GOOD ON THIS VAVLE MAKE SHERE NO CRACKS IF NOT PULL HOSES AND SEE IF SOMTHING IN VAVLE ITS NEAR THE CANSTER AND THAT IS NEAR THE GAS TANK UNDER CAR PUT CHECK GAS CAP MAKE SHERE ITS TIGHT HOPE THIS HELPS
Posted on Sep 15, 2009
SOURCE: CODE 042 ON A VOLVO S60
Brake lights and cruise control are not set properly.
Easy check - are your brake lights coming on with just the usual light touch of the pedal? If not, then the microswitch that senses that your foot is on the brake needs to be adjusted or replaced.
Posted on Sep 22, 2009
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.
Posted on Nov 04, 2009
If the code is P0075, it means: 'Intake Valve Control Solenoid Circuit, Open'. This will affect the engine power. I suggest you to get the car serviced in authorized Volvo-garage and mention the fault.
Posted on Jan 16, 2010
SOURCE: What does P0785 mean
PO785 is a shift solenoid malfunction code. Could be just solenoids that need replacement. If it has the GM trans, it's a big job as solenoids are under side cover of trans axle. Sub frame removal required. Pete
Posted on Feb 08, 2012
Tips for a great answer:
May 15, 2014 | 2001 Volvo S60
May 06, 2014 | 2001 Volvo S60
Mar 17, 2014 | Cars & Trucks
Mar 30, 2013 | 2005 Volvo S60
Jan 11, 2013 | 2001 Volvo S60
Sep 15, 2009 | 2002 Volvo S60
Aug 01, 2009 | 2002 Volvo S60
Aug 16, 2008 | 2004 Volvo S60
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: