Question about Cars & Trucks

Open Question

I have a 2003 Chevy s10, Where can I find the Air Charge Temperature sensor?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 27 Answers

SOURCE: STARTING PROBLEMS WITH CHEVY S10 2003

first you need to check if your are getting spark, then go to fuel pressure, you should have 60lb of pressure

Posted on Feb 02, 2009

Ad
  • 1 Answer

SOURCE: Air charge temperature sensor replacement

There are two of them. I mean sensors. One of them is IAT and another is Mass Air sensor ! But which one , where I don't know. Somebody help please !!!

Posted on Apr 03, 2009

  • 107 Answers

SOURCE: Air intake sensor

the air intake sensor is a 2 wire sensor usually located in or close to the air cleaner

Posted on Jul 11, 2009

johnjohn2
  • 5763 Answers

SOURCE: The outside air temperature sensor for the 2003 Camry

the sensor is located in front of radiator if you open hood and look down behind front bumper you should see it, or look from under the frt bumper, it easy to change, also get part from dealer it not $$,hope this helps.

Posted on Nov 28, 2009

Testimonial: "Thanks-- I found it."

  • 17 Answers

SOURCE: On a 2003 chevy s10 4.3 v6 which side is the bank

Drivers side = Bank One, Passenger side= Bank two.

Also sensor one is before catalic converter and sensor two is after catalic converter.

Posted on Dec 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the cabin air filter for a 2003 chevy s10


The 2003 S10 does not have a cabin air filter.

Mar 20, 2013 | 2003 Chevrolet S-10

1 Answer

How to bleed air from 2003 chevy s10 fuel line


There are bleeder lines on top of the engine on the fuel lines...with the engine running use a blunt object and cloth to depress the valve covering it as not to get wet with the gas spurting from the line while air escapes

Oct 23, 2012 | 2003 Chevrolet Chevrolet S-10

1 Answer

My 2001 Chevy S10 truck 2.2 L the engine is always cold. The temp. is just above 100 degrees and the check engine light is always on. I got the computer read and indicates a faulty thermostat. I replaced...


Are you sure the coolant isn't heating up? I had the same issue once and the problem was i hadn't opened the high point vent on the cooling system. there for no liquid was getting to the sensor ie. it wasn't reading the true temp of the coolant. If that's not it try pulling the sensor out get enough slack in the wiring so you can get the sensor into a small pan of water. put scalding hot/boiling water in the pan have someone watch the guage put the business end of the sensor into the water and see if your temp rises. If not you were ether given the wrong sensor or a defective one.

May 16, 2011 | 2003 Chevrolet S-10

2 Answers

2003 chevy cavalier with no heat and temperature doesn't rise past 40 degrees engine code P0128 comes up when checked and the thermostat and radiator have been replaced still isn't fixed what do i do?


A code P0128 may mean that one or more of the following has happened:
  • Low engine coolant level
  • Leaking or stuck open thermostat
  • Faulty cooling fan (running too much)
  • Faulty coolant temperature (ECT) sensor
  • Faulty intake air temperature (IAT) sensor
Possible Solutions

Feb 27, 2011 | 2003 Chevrolet Cavalier

1 Answer

Where is the temperature sending unit located on a 2000 chevy s10 2.2 four cylinder engine


The temperature sending unit is screwed into cylinder head. Careful you also have a coolant temperature sensor that threads into intake manifold. Temp sending unit is how your guage knows how hot your engine is. Coolant temp sensor is how your computer knows how hot or cold your engine is, so it can compensate fuel & air mixture.You can not put the wrong one in the wrong place, they will not fit. You change 1 for 1 reason & the other for another reason.

Jun 16, 2010 | 2000 Chevrolet S-10

1 Answer

Where is the iat sensor located on a 1999 chevy cavalier 4cyl


The Intake Air Temperature (IAT) sensor determines the air temperature inside the intake manifold. Resistance changes in response to the ambient air temperature. The sensor has a negative temperature coefficient. As the temperature of the sensor rises the resistance across the sensor decreases. This provides a signal to the PCM indicating the temperature of the incoming air charge. This sensor helps the PCM to determine spark timing and air/fuel ratio. Information from this sensor is added to the pressure sensor information to calculate the air mass being sent to the cylinders. The IAT is a two wire sensor, a 5-volt reference signal is sent to the sensor and the signal return is based upon the change in the measured resistance due to temperature.

a8b6fbb.jpg

Fig. 1: The IAT sensor is located in the air cleaner outlet tube-2.2L engine and 2.4L engine

Hope helped.

Apr 11, 2010 | 1999 Chevrolet Cavalier

1 Answer

Outside temperature reading on my 2009 Chevy Silverado truck is always 4-8 degrees lower than the actual outside temperature.


the outside temperature sensor on vehicles takes the temperature of the air about 2-3 inches off the ground, that close to the ground it might be a couple degrees colder than the temperature on the thermometer you have mounted in the window of your house.

Feb 25, 2010 | 2003 Chevrolet Silverado 1500

2 Answers

On a 2003 chevy s10 4.3 v6 which side is the bank one 02 sensor on?


Drivers side = Bank One, Passenger side= Bank two.

Also sensor one is before catalic converter and sensor two is after catalic converter.

Dec 24, 2009 | 2003 Chevrolet S-10

1 Answer

Air flow sensor


i am a jet distributor.. contact jet at Toll-Free: 800.535.1161
Local: 714.848.5515......tech support are pros and will walk you through fix or replace if necessary..... good luck

Dec 17, 2008 | 2003 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...