Question about Kia Cars & Trucks

Open Question

A '04 Kia Sedona,it's a minivan& my rr lug nuts shear off & 1time almost lostA tire while driving,& has happ'd 2times since! ItsNow prked on hywy w only1 lug nut on rear tire it sheared rest off.Y?

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
stormbrewin
  • 426 Answers

SOURCE: Broken lug stud on rear wheel.

It appears from the excellent picture that the stud has to be spun to line up the half moons at the rear of the stud.Use two thin nuts locked together so you can spin the remaining stud to line up with reliefs in back of the retainer.

Posted on Oct 18, 2008

Ad
  • 7353 Answers

SOURCE: Drivers side lug nuts have sheared off twice after

thats wierd...... is the wheel clean and not corroded, where the wheel and hub meet? lug studs clean? hub clean, no rust? wheel properly torqued to 100 ft lbs?

Posted on Dec 01, 2010

SOURCE: 2 lug-nut studs sheared off

I would only be guessing on the why it happened

You would be the one to know the vehicles history

I NEVER use air guns on wheel lugs or seldom
anything else & I have every tool you can own

The pros can not start their day or function at all
without an air tool

So I would say they broke them with too much air
pressure

Also, I will disagree with the trade publications, which
I get,having once owned a business, based on
almost 50 years experience & say you need clean
studs & I use anti-seize and only 80# on lugs nuts.
Never had one loosen up.

Hopefully you can hammer them out & install new ones

If they were on the front,then you don't always have clearance
& have to replace an expensive hub assy.

You can do that yourself
Get the studs at parts store & use an old nut & some spacers
or washers to draw then in

Or have a tire store do it
They may be able to use there air gun to pull them in
without any issues

Posted on May 25, 2011

emissionwiz
  • 76164 Answers

SOURCE: jeep broken lug nut stud

Causes are the mounting surface of the the rotor or drum not clean when wheel was installed, wheel bent, suspension damaged, wheels not torques down correctly or left loose.

Posted on Apr 09, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i release the spare tire on my 2005 Kia Sedona


Hi, the spare tire is stored on the underside of the vehicle, under the right-side cargo door. The bolt is located in a recessed area that is protected by a small square plastic covering. To remove the spare tire, find and remove the bolt cover, then use your lug nut wrench to loosen the bolt holding the tire.
Remove the spare tire fastener's plastic cover, place the lug nut wrench onto the lug nut holding the tire onto the bolt, turn the wrench in a counter-clockwise direction until the tire is released and reaches the ground.

Jun 20, 2011 | 2005 Kia Sedona

1 Answer

I just bought a 2007 kia sedona and it pulls to left at low speeds i brought it back for them to do an alignment and it is still pulling to the left after they aligned it. What can i do to get this problem...


Are --Motor & Transaxle Mounts good?
Are --drive axles okey?
Tires at same pressure,same diameter,
when aligned?
Did they check for ride height & bent components?

Does it only pull left, when braking?

Is Steering Rack bound up and stiff?

Feb 16, 2011 | 2007 Kia Sedona LX Minivan

1 Answer

I have a kia sedona 2009 minivan and I am wondering what size winter tires to buy.Should I buy 235-60-17 or 225-70-16. Thank-you


They are both pretty much the same size. The first # (take for example 235/60) 235 is the width of the tire and the 60 is the percentage of the width in height. So the other tire which is 225 is narrower but 70 percent of that width is the height. So what you have is 2 tires that are pretty much the same height but one is a bit narrower. Either tire should be just fine on your van. I hope that isn't too confusing

Nov 30, 2010 | 2007 Kia Sedona LX Minivan

2 Answers

What size tire is for the kia sedona mini van?


The factory original size is a 225/70R16.

Nov 04, 2010 | 2007 Kia Sedona LX Minivan

1 Answer

Wiper blades not moving, I can hear wiper motor working but arms dont work


the Kia Sedona is identical to my hyundai entorage minivan, this happen several times to me you have to tighten the nut that secures the wiper assembly to the motor, the shaft gets worn and losens up. you may have to replace the wiper motor.

Feb 27, 2010 | 2007 Kia Sedona LX Minivan

1 Answer

Nut Torque Specification Guide 2004 Kia Sedona front wheel hub assembly


Lower ball joints. Tighten the pinch bolts to 69-85 ft. lbs. (93-115 Nm). Outer tie rod ends. Tighten the nuts to 43-58 ft. lbs. (59-78 Nm). Sway bar links. Tighten nuts to 69-85 ft. lbs. (93-115 Nm). Hub retaining nuts. Tighten the hub nuts to 177-199 ft. lbs. (240-270 Nm). Front wheels. Tighten the lug nuts to 65-79 ft. lbs. (88-108 Nm).

Jan 28, 2010 | 2004 Kia Sedona

1 Answer

2007 kia sedona serpentine belt diagram


how to loosen tensioning pulley to change drive belt on 2007 Kia Sedona

Nov 14, 2009 | 2007 Kia Sedona LX Minivan

1 Answer

Sheared front lug


First remove wheel from car. Next take large hammer and drive whats left of lug out, you may need to use a punch if sheared off below hub hight. Now insert new lug stud in from back side of hub and use a open style lug nut (like those you see on old cars without nice wheels) and put on upside down, flat side towards hub. tighten up by hand then use socket to tighten down untill stud is pulled in all the way. In some cases you may need to use a few washes under nut to give enough room for shank on stud.

Sep 09, 2009 | 1993 Pontiac Sunbird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...