I need instructions to program keyless entry remote for 2002 Hundai Santa Fe
1994 to 2006 Sonata, a 2001 to 2006 Elantra, a 2000 to 2006 XG350 or a
2001 to 2006 Santa Fe, you will need to access alarm system control
module. On most of those vehicles it is located on the driver's side
fascia panel. But on the Sonata, the facia panel is in the center.
Once you have found this module,
you will want to ensure that the memory switch is in the OFF position.
Then turn the ignition on.
Wait 5 seconds and set the
memory switch to SET position and then press the remote transmitter lock
button to send the code to the alarm system control module.
If you would like to program a second remote transmitter then you will need to press second remote transmitter lock button.
Next set the memory switch to
off, then turn the ignition off. You can confirm your programming by
locking and unlocking the vehicle with both of the remotes. good luck my friend
Feb 08, 2012 |
Hyundai Cars & Trucks