Question about Cars & Trucks

Open Question

Finding a p[hone number for Damien Harcombe - Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4x4 courier 1997model 3.4l it has been been overhauled twice in 7monthsand has the same problemagain. compression tests at2.2 bar.. advice please


Possibly they didn't think it needed a rebuild and charged you for it anyway. Some are that desperate. I don't know for fact this happened to you, but is feasible. Once an engine is rebuilt and you break it in properly, it should last for years, not months. Do a compression test on it yourself to see what the compression is up to par. Take the head off after that and look at the cylinder walls for where it has been honed and check for a ridge at the top from ring wear. If that ledge is there, they took you for a ride and made you pay for it. That ridge gets cut out anytime a cylinder is bored and honed. And 7 months isn't long enough to wear all the hone marks from the cylinder walls.

Nov 13, 2017 | Cars & Trucks

1 Answer

Which carb. set up would give my 454ci more HP duel quad or a tri pack set up.


I couldn't have saidi it better than bill although I probably would use a predator or a Holley 850 cfm double pumper with an intake change to a mid rise with a longer runner and have it extrude honed same with heads also stay with port shape example oval to oval square to square and have heads ported polished and honed

Oct 01, 2016 | Cars & Trucks

1 Answer

How to install a master cylinder


a cilinder you can't just replace, and rarelly is done by one, you have to hone the 'input' but normal you replace all ,, in the case of one you can't do it yourself , since they hone and polish the inside and why replace 1 chilinder?

Sep 10, 2014 | Cars & Trucks

2 Answers

Cylinder hone or just clean


Do not hone anything. It its just light rust, dont wory about it. If the rust is heavy take stel wool and some penetrating oil (blaster) and try to clean it up.. Just oil the cylinders down when ready to put the head on.

Oct 27, 2009 | 2003 Pontiac Grand Am

1 Answer

How do i wire up my pioneer deh-11 head unit to my 94 cavalier without a wiring harness


Hey

If you give me a list of the wire colours and which ones are thicker than others il walk you through it!

Damien

Aug 22, 2008 | Chevrolet Cavalier Cars & Trucks

1 Answer

Engine making skreeching noise if not fan belt what other problem may it be


hello

Id say more than likely it is your fan belt, if not i would look towards the alternator and water pump!!

Damien

Aug 22, 2008 | Alfa Romeo 156 Cars & Trucks

1 Answer

Signal


hey

Did you check all Your fuses? if there fine check all over your relays to see if they make a click when the hazards are on!

Damien

Aug 22, 2008 | 1999 Ford F150 Regular Cab

1 Answer

Transmission


Hey

yes there should be no difference once there from the same model!! just check and make sure the mounting points on each gearbox is the same

Damien

Aug 22, 2008 | 1996 Volkswagen Jetta

1 Answer

CAR DO NOT START


hey

bring power directly to coil and try and start it!! if it starts then check the wires going to coil!!

Damien

Aug 21, 2008 | 1999 Daewoo Nubira

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...