Question about Ford Cars & Trucks

1 Answer

I have a 2001 Ford focus zx3 and have changed my switch that does my blinkers and bright lights because my blinkers don't work half of the time, I thought that would fix the problem it didn't any idea

Posted by on

  • Janice Rector
    Janice Rector Apr 17, 2017

    From what I have found if it has one I can't find it, do you know where it is Jeff?

  • Janice Rector
    Janice Rector Apr 17, 2017

    Never mind I went brain dead and was thinking of something else, it's above the radio, will that cause the blinkers to work sometimes and then sometimes not, but I can flip the brights on then off and then the blinkers work, what's your opinion because I am just at lost with it.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 11,056 Answers

The hazard flasher switch .

Posted on Apr 17, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change a valve cover gasket on a 2001 ford focus ZX3 2.0 Ztec DOC engine


Mary, PLEASE be sure this looks like your motor even thoe its a 2.3 it still should be the same valve cover .if its not let me know an i'll look further . if this helped you please let me know.
Woody

Sep 20, 2014 | 2001 Ford Focus

1 Answer

2001 ford focus ZX3 No tail lights or instrument panel lights


Pull and visually inspect fuses. If fuses are good, then headlamp switch is suspect.

Feb 24, 2011 | 2001 Ford Focus

1 Answer

Ford focus zx3 2001 driver side door does not open from outside


that small plastic thing is always braking(slam the door a few times.....)you can get one from a ford dealer and its a pig to get to to repair....

Jul 09, 2010 | 2001 Ford Focus

1 Answer

The left blinker on my ford focus zx3 started


Check both bulbs are flashing,it usually means bulb failure

Apr 06, 2010 | 2004 Ford Focus

1 Answer

2001 Ford Focus ZX3 rear window wiper and trunk release stop work


there is a recall on them i had the same issue it is caused by the wires being crushed when the trunk colses(im an ex ford mechanic, and ex owner of a focus)

Dec 16, 2009 | 1999 Ford Explorer

3 Answers

Rear blinkers and brake lights on 2001 ford focus not working


yes it sounds like the turn signal switch is defective, the brake lights go through that switch as well.

Sep 06, 2009 | 2000 Ford Focus

4 Answers

2001 ford focus ZX3, #10 fuse keeps popping.


a loose or damaged wire is causing a short circuit!
you ned to get it tested & rectified by a auto electrician ASAP!
as wiring gets very hot & can destroy your vehicle! {catch fire]

Jul 20, 2009 | 2000 Ford Focus

1 Answer

I have a 2001 Focus Zx3. The dashlights, parking


Sounds like a short circuit here ? You will need to locate the short circuit . Most probable is the tail lamps and their connections , then number plate lights , then any hinged wiring going from body to a door or trunk (ie No plate illum lights) area . Sometimes the dash dimmer can be a problem . Good luck

May 08, 2009 | 2001 Ford Focus

1 Answer

How to change the license plate light on 2001 ford focus zx3


Take a thin blade screw driver and gently pry between the rubber seal and the metal and pop the light out, replaced the bulb and pop the light back in. works fine.

Mar 22, 2009 | 2001 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...