Question about Chevrolet Cars & Trucks

1 Answer

I have an 85 Chevy K10 with ECM computer and a TBI system I've rebuilt rebuilt a TBI system put a new fuel pump high volume and replace the pump relay now when I turn the key to on

It does not shut off after the 2 second or 3 second turn on is activated what would cause this not to shut off I replace the ignition switch to fuel pump relay traced all my wires any ideas

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Chevrolet Master
  • 265 Answers

Hello Jesse,

What does not shut off?
And what are you referring to when you say "the 2 second or 3 second turn on.

Please clarify your issue and include some more information on your K10 model and engine.

Posted on Apr 20, 2017

  • jackdo2 Aug 13, 2017

    Hello Again Jesse,
    The short on cycle from your stock fuel pump may not be how your new high volume fuel pump
    operates. Please contact the parts dealer where you purchased you new fuel pump to inquire about the products operation.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code p025a fuel pump module tested relay it is good why is there power on # 85 with key off


DTC P025A: Fuel Pump Flow Control Module Enable Circuit
The engine control module (ECM) supplies voltage to the fuel pump flow control module (FPCM) when the ECM detects that the ignition is on. The voltage from the ECM to the FPCM remains active for 2 seconds, unless the engine is in crank or run. While this voltage is being received, the FPCM closes the ground switch of the fuel pump and also supplies a varying voltage to the fuel tank pump module in order to maintain the desired fuel rail pressure.
Circuit/System Testing
  1. Ignition OFF, disconnect the harness connector at the FPCM.
  2. Ignition OFF, install a test lamp between the control circuit terminal 13 and ground.
  3. Ignition ON, verify that a test lamp illuminates for 2 seconds.
  4. ?‡'
    If the test lamp does not illuminate, test the control circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the ECM.

  5. If all circuits test normal, replace the FPCM.
Relay for what ? Which engine do you have LY6 or non LY6

Aug 24, 2015 | 2009 Chevrolet Silverado 1500

2 Answers

I have a 1987 chevy S10 4x4 xcab pickup . it just died one day i rebiult the TBI and put a new computer in it and new coil in . Have checked all the fuses . and it will not start .do you know what i


Check if you have spark (coil or ignition problem) Next consider what you did when rebuilding the TBI as there may be parts that will only operate in one way or settings that have to be adjusted. Lastly is the new ECM compatible with the system (immobiliser) Use a scanner to reset the ecm program

Nov 22, 2014 | 1987 Chevrolet S-10 Pickup

1 Answer

My 89 camaro 5.0 TBI starts and idles good. It will not accelerate and acts like its starving for gas. There are no codes showing up.


Check your repair manual for ECM voltage and signals! There is no communicatiin between the the ECM advance and the engine beyond idle..........

Jan 28, 2014 | 1988 Dodge Dakota

3 Answers

I have a 1988 Chevy K2500, V8-350 cu. in with TBI. I have fire, but there is no fire running to the fuel pump. There is a new fuel pump relay installed and the fuse is also good. Truck ran fine, then...


Oil pressure switch puts power to the pump after it is started.

Pumps also tend to loose their ground with age. I often splice in a new ground at the pump to eliminate that problem area.

Need some votes, thanks

Aug 22, 2010 | 1990 Chevrolet K2500

1 Answer

My injectors have no power going to them. i just replaced fuel pump and relay. i have fuel going to my 350 tbi but nothing coming out the injectors.it wont start and i have no power at the injector so i...


my injectors have no power ging to them. i just replaced fuel pump and relay. i have fuel going to my 350 tbi but nothing coming out the injectors. it wont start and i have no power at the injector so i dont know if its the ecm or what

Nov 08, 2009 | 1988 Chevrolet K1500

2 Answers

89 GMC K2500 5.7L TBI not spraying fuel


have you checked the coolant temp sensor? it controls air-fuel mixture.

Jul 16, 2009 | 1989 GMC K2500

2 Answers

1990 chevy camaro with a rebuilt 350 Tbi


fuel pressure isnt right.. need to get a fuel pressure regulator so you can regulate the gas flow..

Apr 21, 2009 | 1990 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...