Question about Cars & Trucks

1 Answer

THE POWER WINDOW ON PASSENGER SIDE OF MY 2010 COBLOT IS STUCK IN THE DOWN POSITION HOW DO I GET IT BACK UP

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 32 Answers

It sounds like your motor may have died...or possibly a bad fuse?
If its not a bad fuse... You may have to remove door panel and disengage the motor and lift the window up manually. Then hook the motor back up to keep it from dropping back down. If you do not feel comfortable doing this. Take it to your local mechanic or dealership to have it fixed.

Posted on Apr 17, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger power window stopped working with either controls


Power Windows not working - CarGurus

www.cargurus.com > Questions > Honda > Accord

CarGurusOct 9, 2012 - Power Windows not working - I have a 2006 Honda Accord and thepassenger and back power windows quit working all at once. ... My key less entry doesn't work either after I replaced the master Window control unit. 6 out of ...

Passenger Power Window Not Working ' ClubCivic.com - Your Online ...

www.clubcivic.com > ... > Interior / Audio / Electronics
Oct 28, 2009 - My passenger side window is not responding to either the driver side orpassenger side switch. It is in the up position and wont go down.

Jan 19, 2016 | Cars & Trucks

1 Answer

Passenger power window stuck open on 2010 Nissan Xterra


Do u hear the window motor in the door working when u try to up the window? May be the motor, window trans or electrical.

Aug 05, 2017 | 2010 Nissan Xterra

1 Answer

2010 toyota venza side window hasa been replaced and when it goes up to top it goes back down because it thinks ther is something in the way!


Try this

turn the key to the run position, do not try and start. press and hold the window switch in the down position until the window is all the way down, then count to three. Hold the window switch in the up position until the window is all the way up, then count to three. Push the window button down to engage the auto down function (you do not need to hold it down). once the window is all the way down pull up on the window switch momentarily to activate the auto up (you do not need to hold the switch in the up position). The window should now be reset.

Nov 29, 2012 | 2010 Toyota Venza

1 Answer

My passenger window is stuck in


Not a fuse,Most likely a grounding issue with the switch or maybe switch needs replaced. This is a common problem with power windows and 9 times out of 10 it is in the one on the drivers side even though its the passenger window giving the problem...driver side controls all power supply....may be loose connection. Check that first...hope this helps and if so Please leave a rating on this post..

Aug 14, 2012 | Cars & Trucks

4 Answers

Passenger side window stuck in down position


Volcompunker is on track.... if it is a stuck motor problem, before taking door apart, try this...it may work, works well on dodge caravans...

NO COST and fast PROCEDURE TO FIX IT:

1. Sit in vehicle, on seat next to problematic window
2. Ignition key is on
3. Door in question is opened (in case you closed it)
4. While door is open, press and hold power window button in desired window travel, keep button pressed !!
5. SLAM hard the door closed with one hand while other hand holds button as per #4.
6. Watch window operate as it should.

7. Repeat 3-6 if necessary, but usually the first try works!

Jul 11, 2010 | 2001 Ford Expedition

1 Answer

Front passenger side window is stuck in the down position


Sounds like the regualte or push arm is broken. If there is no spound then sounds like the regulator. The inside door trim has to be taken off, find the regualator, remove and replace should be ok then.

Feb 17, 2010 | 2006 Kia Spectra

1 Answer

Passenger side window stuck in down position. How


sometimes u can bang on lower door panel while pushing on window up button it may work

Jan 31, 2010 | 1988 Chevrolet C1500

1 Answer

All windows but drivers won't go up or down 2001 GMC yukon


If they sound like they are trying to do something it's not the lock out switch . But to be sure pulling out the switch an testing for B+ voltage to and from the switch . Plus pull the other door switches to see if they have B+ voltage and good grounds would be the thing to do.. If you don't know how to check automotive electrical circuits your best bet , take it to a qualified repair shop .
Passenger Power Window Operation
The passenger power window switches incorporate window up and down relays. The relay coil feed and supply sides are powered through the RAP fuse supply voltage circuit. The normally closed contacts of each relay is connected to ground. The load side of each of the relays are connected to either side of the power window motor through the power window up and down circuits. The up and down relay control circuits are connected to the normally closed contacts of the passenger window switch. These contacts are wired in series with the power window master switch, through the power window master switch up and down signal circuits and then to ground when the power window master is placed in the up or down position. This allows for the up and down operation of the passenger power window from the power window master switch. The center pole of the passenger power window switch is also connected to ground and will energize the relay when placed in the up or down position.

Driver Power Window Operation
The driver power window is unique from the passenger power windows in that it does not use window up and down relays. The driver power window is operated directly from the power window switch.
The normally closed contacts of the switch are connected to ground and the center pole is connected to the RAP fuse supply voltage circuit. By placing the left power window switch in the down position, voltage is applied to the power window motor left front down circuit and to the power window motor. The other side of the power window motor is connected to ground through the normally closed contacts of the left power window switch through the power window motor left front up circuit and drives the window down.
By placing the left power window switch in the up position the polarity of the motor is reversed and the motor drives the window up.

Has circuit breaker for B+ power
• PWR WDO CB 25A (fuse block) (System power for left and right windows 2-door vehicles. System power for LF and LR windows 4-door vehicles)
• PWR WDO CB 25A (IP wiring harness junction block) (System power for RF and RR windows 4-door vehicles)

Could be passenger door switch .

Aug 21, 2017 | 2001 GMC Yukon XL

2 Answers

Passenger Window Stuck all the way Down


Try switching the power window switch from the passenger side to the drivers side. Before you do that try with the switch on the up position, wiggle it from side to side. The contacts may be worn and by wiggling it may make contact. Other then that try to park it in side or garbage bag taped to keep rain out till you get it to the shop.
Hint, take it to a Auto window repair shop to replace the switch if it's bad or if the motor is bad. They have more experience to removing the door panels and removing the power window regulator (motor) if that needs to be replaced.
Good luck and hope this helps. 

May 30, 2009 | 1999 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...