Question about Audi Quattro
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi this was exactly the problem i had with my Laguna 1.9dci its a sensor switch on the steering column. Cricical circuit to the car. so will not run without it. afraid you will have to replace the sensor. had to get renault to do mine.
Posted on Mar 06, 2009
SOURCE: Audi TT fuse box
It is in the end of the dash board. open the drivers door so you can see the end of the dash and ease the semi circle shaped cover off. There is a fuse pulling tool in there too ;o
Posted on Mar 09, 2009
I would suggest you check oil levels etc. Generally these cars suffer from the air mass meter / air sensor problems aswell as coil problems too. Did you ever get a solution to the problem?
Posted on May 01, 2009
check the fuse sounds like that has blown as hazards work on a relay indicaters are off a fuse
Posted on May 20, 2009
Had a similar problem audi come into my shop. No headlights, blower motor would not work, wipers would not work. After dinking around found ignition switch wires had burn't up. Remove top steering column by taking out two very small philips screws from under column. Look at top LH side of column w/ top cover removed. Probably will find wires burnt up.
Posted on May 28, 2009
Tips for a great answer:
Jun 13, 2015 | 2002 Audi TT 1.8L
Dec 18, 2013 | Audi TT Cars & Trucks
Mar 17, 2013 | 2002 Audi TT
Jul 02, 2010 | 2002 Audi TT
Jun 05, 2009 | 2005 Audi TT
May 20, 2009 | 2002 Audi TT
Mar 18, 2009 | 2002 Audi TT
Mar 04, 2009 | 2001 Audi TT
Nov 10, 2008 | 2001 Audi TT
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: