Question about Toyota Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 03 TOYOTA RAV 4 CRANKS
have scanned if light is on. it may be a bad or failing crank sensor. for the sensor controls timimg, it will stop engine while driving. have a good day!!
Posted on Nov 13, 2010
Here is the reset procedure:
1. Have the Valet Button in the OUT position. ( It is located on the dash panel left of the steering column)
2. Connect the battery - the alarm will sound.
3. Put the key in the ignition and turn to the ON position,
4. Push the Valet Button to the IN position.
The alarm will be reset, and the Valet Button will glow red.
Move the Valet Button to the OUT position again.
Repeat steps 3 & 4 and the Valet Button will become unlighted.
The car will start and everything will be fine.
Posted on Apr 20, 2012
SOURCE: the immobilizer for my 2001 Toyota camry is damaged, i had armed the car. how do i reset the alarm. i am able to start and drive the car but it is still flashing the hazard, i disconnected the siren.
Most of the time you can lock and unlock the drivers door with the key to disarm the system.
Posted on Aug 10, 2012
put fuse back in disconnect batt wait 60 seconds re attach, when the horn starts honking lock and unlock drivers door with the key while doors closed window down. get in car and start it, should be fine now.
Posted on Mar 13, 2013
Disconnecting a battery cable for about 10 minutes resets computer of vehicle. This may help, maybe. It will also reset your radio stations so be aware. :.)
Posted on Apr 05, 2013
Tips for a great answer:
Tip & How-To about Cars & Trucks
Want to bypass your vehicle security system?
The short answer is you can't!
All modern cars have alarms and immobilizers. There is a chip in the key and a chip in the ignition lock. If both are present, the ECM (engine control module) releases power to the ignition circuit. When you turn the key, the starter spins the engine and you get a spark. If any one of those three items are not in the chain, you get the engine to turn, but no spark. There is no way to beat the system.
The immobilizer is in place to stop exactly what you are trying to do. Vehicle theft has reduced to virtually nil.
Posted by Andrew... on Mar 26, 2016
Nov 20, 2016 | 2008 Toyota Tundra
Oct 19, 2015 | Toyota Cars & Trucks
Jun 06, 2014 | Cars & Trucks
May 30, 2017 | 2008 Toyota Avalon
Dec 25, 2010 | Toyota Celica Cars & Trucks
Dec 20, 2010 | 2007 Toyota Avalon
Nov 02, 2010 | 2007 Toyota Land Cruiser
Dec 21, 2008 | 2008 Toyota Yaris Sedan
22 people viewed this question
Usually answered in minutes!