Question about Hyundai Cars & Trucks

Open Question

My backup lights are not working on my Hyundai iload van I have a 5 speed gearbox all of the fuses are fine is there a switch on the gearbox

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: need to find the backup beeper or reverse light

You can purchase a reverse bulb that that has an audible signal only when the reverse lights come on. Check some parts stores. I have one in my 1995 F350, It works Great.

Posted on Apr 20, 2009

motor1258
  • 6674 Answers

SOURCE: location of the reverse backup light switch

At left (drivers side) rear of transmission, it should be threaded in, with wires running to it.

Posted on May 18, 2009

  • 1 Answer

SOURCE: My backup lights are inop. Bulbs are new, both

there shoudlbe a sensor or two wires coming from the transmision two female ends two male ends , if the arent conected thats your problem , good luck

Posted on Nov 10, 2010

ghost45
  • 1280 Answers

SOURCE: where is backup light switch located on 2006

You didn't say if this vehicle was Automatic Transaxle or Manual Transaxle. No need

here are two photos: One is Manual, the other is Automatic. The manual trans has a separate switch (all by itself), however, the automatic (of both the 4 cylinder and 6 cylinder) use the trans range switch to provide power to the back up lamps

ghost45_6.jpg


ghost45_7.jpg


Hope this helps

Posted on Feb 16, 2011

  • 9 Answers

SOURCE: Montana van 2002 the fan speed switch are only

check the blower motor resister

Posted on Mar 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why won't it go in reverse?


The Ford has some links to VW systems, like the Galaxy is the same as the VW Sharan. This particular VW I have quoted will not go into reverse if the reversing/backup light is faulty. Check that by checking the bulbs, fuse and switch.

May 12, 2015 | 2001 Ford Escape

1 Answer

Iload


It is in your fuse box.First locate your fuse box.If you have the car manual in the glove box it will show you exactly where it is, if not look in your fuse box it is usually a 10 or 5 amp fuse.the cigarette lighter is sometimes the same fuse as your dome light.But check the lower amp fuses first.

Apr 02, 2014 | 2001 Hyundai Sonata

1 Answer

Hyundai Iload diesel won't start, have replaced engine in van with changeover from wrecker & it turns over but doesn't fire up


run the scanner to reset the ECM and immobiliser
make sure that the cranking speed is fast
check for air in the system
check that the stop solenoid is connected

Nov 03, 2012 | Hyundai Cars & Trucks

1 Answer

Ground 204 Restraint contol module


try a new switch in the gearbox ,most common fault

Jan 27, 2012 | 2000 Lincoln Town Car

1 Answer

Where is the backup light switch located for 1998 Hyundai Accent GS


On the gearbox. this is easy to find but requires 2 people as there is 2 or 3 plugs on the gearbox. put the vehicle in reverse and turn ignition on, DO NOT START! remove one plug at a time from the transmission while someone stands at the rear of the vehicle and lets you know when the reverse lights go out.
KEEP HANDS AWAY FROM THE FAN AS THEY CAN START ANYTIME AND REMOVE ANY JEWELERY. Good luck.

Jul 18, 2010 | Hyundai Motor 1998 Accent

1 Answer

Volvo 240 reverse lights don't work


Hi Sir

Checked the switch and plug? here's how :)

Yes it is the reverse light switch which is hooked up to your gearbox which needs to be replaced. Also it could be the plug going into this switch is a bit dirty or thorn (due to engine temperature and time wear) which in that case means that it needs to be fixed before replacing the switch.

Checking its actually the swtich so you don't buy it for nothing :)

Just to make sure that the circuitry is ok. Go to the gearbox (if it is front wheel drive transverse engine you wont need to go underneath) check where the gearbox and linkages are close to the revers there should be a switch n plug hooked up to it. Unplug it put in a piece of wire to short circuit both wires. Then turn the ignnition key on and if your circuitry is fine the lights should go on :) This means that its the switch for sure :) I hope that this helped your problem :)

CHEERS

Jan 07, 2009 | 1988 Volvo 240

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...