Question about Ford Thunderbird

Open Question

Want to remove center console in 89 ford tunderbird. Con not locate front mounting bolts

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: 2001 S60 Volvo Engine Mount

yes,, do exactly as you describe

Posted on Nov 26, 2008

Ad
lastech
  • 408 Answers

SOURCE: how do you remove the center console in a 1982 Mercedes benz 380S

hi,center console or center gear lever cover(wooden console)

  • remove radio,then remove control unit of aircon by pressing down the 2 latch,located in upper edge in radio hole.remove screw in upper part of console
  • remove black cover (look like astray)fold both side,remove screw
  • remove shifting lever
  • try to lift in the console,be careful,sometimes sticky



Posted on Mar 22, 2009

  • 71 Answers

SOURCE: 1992 Buick LeSabre - Water Pump Bolts Near Engine Mount.

I'm not sure what motor you have in that Buick, but my wife's 92 Old's water pump went out and I had a heck of a time with the bottom two bolts. I talked to a mechanic and he told me to put a piece of wood on top of a floor jack, slide it under the oil pan and lift the motor off it's mounts to gain easier access ,and after I did, with a lot of patience I got the job done.(About 2 hours, a 1/4 turn a a time) I hope this helps

Posted on Aug 27, 2009

  • 811 Answers

SOURCE: 1997 ford f150 4.2 L engine starter mount bolts

take old bolts to auto parts store and match

Posted on Sep 13, 2009

  • 20 Answers

SOURCE: cigarette lighter on front console does not work

try the kick panel, near the foot rest...pull the panel, it slides back

Posted on Oct 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove center console from 2002 ford explorer. do I have to remove the seats?


I don't think you have to remove the seats. However any nuts, bolt or screws you remove you'll need to keep in case you're replacing the console.

Open the console and at the bottom you'll find two Phillips head screws.

Look at the front of the console, beneath the radio. Next to the coin holder area, is four bolts. Remove the four bolts with a ratchet.

Look at the center part of the console. There are two Phillips-head screws. Remove these with a Phillips screwdriver.

Pull the console upward to unhook it from the floorboard. Remove it from the Ranger. With the console removed, you'll see the mounting brackets for the console and the nuts the screws and bolts go into. It is not necessary to remove these brackets when replacing the console.

Move the replacement console into the cabin. Line up the console with the mounting brackets on the floorboard. The console screw and bolt holes should be lined up with the mounting bracket's nuts.

Hold the console firmly in place with hand. Insert and tighten the two Phillips-head screws in the console storage compartment, and then insert and tighten the four bolts at the front part of the console. Insert and tighten the two Phillips-head screws in the center of the console.

Hope I didn't over explain. Hope this helps.

Jan 29, 2015 | 2002 Ford Explorer

1 Answer

How to remove the center armrest console froma ford escape 2002 model


there are about 8 torx screws (very small) near the hinge of the lid. remove those and the lid will come to remove the entire console, there are bolts on the back of theconsole accesible from back seat, and on the side of the console. easiest way to acces those bolts would be to remove the front two seats. they are held in by two bolts in front and two nuts under plastic covers in the back. raise the emergency brake lever and the console will slide up and be removed.

Nov 04, 2014 | 2002 Ford Escape

1 Answer

I need the location of the crankshaft position sensor on my 1994 ford crown Victoria police interceptor.


Hi there:
On 1994 Ford Crown Victoria 4.6L SFI 8cyl the Crankshaft Position Sensor is located under hood, center, lower engine area, front side of engine, passenger side of crankshaft pulley, mounted in engine block.

11_20_2012_8_33_40_pm.gif


Fig. 2: Remove the retaining bolt for the CKP sensor and remove the sensor from the front cover

Disconnect the negative battery cable.
Remove the accessory drive belt from the engine.
Raise and safely support the vehicle.
Remove the A/C compressor mounting bolts, but do not disconnect the A/C lines. Remove and support the compressor out of the way.
Detach the electrical connector for the CKP sensor.
Remove the CKP sensor retaining bolts and remove the CKP sensor.

To install:
Installation is the reverse of removal.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Nov 20, 2012 | Cars & Trucks

1 Answer

Need help removing center consol to get to radio and heater controls


Its not as complicated as it looks.first of all the front and only part of the center console you need to move simply pops out with two snap in connections at the top and to mounting screws in the back lower bottom...keep in mind moving this part of center console is only for the removal and installation of heater unit...Now for the radio is also quite simple.once you have the heater unit consolek removed,the dash component and vent cover needs to be removed.If you open both car doors @ look
on both sides of your dashboards,theres two covers.remove them..on passenger is a mounting screw for the dash cover.once removed,cover has several snap in connections that will detach it from location...be careful when doig so...now you will see full radio and its mounting bolts...there u have it..hope it helps...

Oct 09, 2012 | 1999 Buick Regal

1 Answer

Need to remove center console to replace seat belt. After removing 12 screws, console is still firmly in place. What else has to be done?


  1. Remove the two oval covers from the sides of the floor console. Remove the four (two on each side) retaining bolts. Lift or remove the front seat center armrest from the floor console.
  2. Remove one screw from the top rear end of the floor console (directly under the front seat center armrest.
  3. Remove four screws retaining the utility tray beverage holder to floor console. Lift or remove the utility tray beverage holder from the console.
  4. Remove two screws (directly under the utility tray beverage holder) retaining the front end of the floor console to the console panel front mounting bracket.
  5. Lift the floor console from the front and rear console panel mounting brackets.

Feb 27, 2011 | 1996 Ford Explorer

1 Answer

Need to know where the IAC sensor is located on a 2004 150 5.4


4.6L, 5.4L & 6.8L Engines
  1. Disconnect the negative battery cable.
  2. Remove the accelerator control splash shield.
  3. Remove the Idle Air Control (IAC) valve electrical connector.
  4. Disconnect the throttle bypass hose.
  5. Remove the mounting bolts and the IAC valve.
  6. Installation is the reverse order of removal. Tighten mounting bolts in two steps:
    • Step 1: to 89 inch lbs. (10 Nm)
    • Step 2: an additional 90°
c17hydro_10.jpg
Idle Air Control Valve

Jan 23, 2011 | 2004 Ford F150

1 Answer

Where is the crank position sensor located on the 2002 Ford Escape? Will I need a rubber O ring or paper spacer?


The Crankshaft Position Sensor (CKP):
4 CYL - located on the front of the engine, near the flywheel end of the block. remove exhaust manifold, disconnect electrical connector, remove bolt. installation is reverse of removal, no gasket req'd. torque to 62 inch-pounds
6 CYL - located next to crankshaft pulley - remove right wheel, remove lower right splashshield. disconnect electrical connector, remove bolt. installation is reverse of removal, no gasket req'd. torque to 89 inch-pounds

Dec 17, 2010 | 2002 Ford Escape

1 Answer

Center console disasembly instructions . we are trying to remove the center console


Base Console, Floor, Ranger, Explorer Removal and Installation
  1. Remove the two oval covers from the sides of the floor console. Remove the four (two on each side) retaining bolts. Lift or remove the front seat center armrest (644A22) from the floor console.
  1. Remove one screw from the top rear end of the floor console (directly under the front seat center armrest.
  1. Remove four screws retaining the utility tray beverage holder to floor console. Lift or remove the utility tray beverage holder from the console.
  1. Remove two screws (directly under the utility tray beverage holder) retaining the front end of the floor console to the console panel front mounting bracket.
  1. Lift the floor console from the front and rear console panel mounting brackets.

c758709.gif

Apr 01, 2010 | 1996 Ford Explorer

1 Answer

Need instructions on how to remove center console to access electric window switch.


Here is what I could find, hope it helps.
Good luck.
Regards,


REMOVAL & INSTALLATION

See Figures 1 and 2
The following procedure is a general procedure for console removal. You may have to modify or skip certain steps depending upon your vehicle.
  1. Disconnect the negative battery cable.
  2. Remove the shift knob, floor compartment door and console trim plate.
  3. Remove the instrument panel accessory trim plate.
  4. Unfasten the retaining bolts, detach the connector, then remove the console door.



0900c152800900b7.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 1: Remove the retainers, unplug the connector, then remove the console door
  1. Remove the seats, as outlined later in this section, in order to get to the lower rear screw(s) on the side trim panels.
  2. Remove the console side trim panels.
  3. If equipped, remove the switch pack housing with the switches.
  4. Remove the console compartment floor protector, bolt covers and bolts.
  5. Unfasten the screws mounting the console to the instrument panel and tunnel.
  6. Unclip the harness and accessory plug.
  7. Tag and detach all necessary electrical connectors.
  8. If necessary, remove any remaining retainers.
  9. Tilt the rear of the console up, then slide the front tab back out of the instrument panel and remove the console from the vehicle.



0900c152800900b8.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 2: Exploded view of a typical console mounting
To install:
  1. Position the console in the vehicle by placing the front tab of the console into the instrument panel slot, making sure to align the screw holes.
  2. Attach the electrical connectors as tagged during removal.
  3. The remaining of installation is the reverse of the removal procedure. Tighten the console retaining screws to 89 inch lbs. (10 Nm).

May 04, 2009 | 1986 Chevrolet Corvette

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...