Question about Cars & Trucks

1 Answer

If the Vdc light and slip light is on and the brake fluid is not low, is it safe to drive?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,748 Answers

I don't know year--make--model?
I'd check brake pads--wheel speed sensors--everything. I can't take the responsibility of telling you it is safe to drive, your brake system is very important. In an emergency would I drive it, yes, hopefully, I wouldn't endanger anybody but myself.

Posted on Apr 16, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a Nissan Maxima 2007 last night my car stalled then the VDC off then slip light came on why did this happen and can I still safely drive my car.


NO, its NOT SAFE TO DRIVE. Your car may loose power in the middle of the intersection and then what? VDC and Slip light may be related to ABS system, please have it check.

Apr 23, 2017 | Nissan Cars & Trucks

1 Answer

Slip and VDC lights are on; 2008 Infinity G37S AFTER brake job.


Lights can be triggered during the repair. Diagnostic equipment will be needed to record the codes and erase them, then you go for a drive and the lights probably won't come back...

Apr 04, 2017 | Cars & Trucks

1 Answer

How to reset vdc sensor on 2006 nissan pathfinder?


Is VDC switch turned on? If not check brake fluid level

Aug 07, 2014 | 2006 Nissan Pathfinder

1 Answer

Brake light slip vdc


Check the brake fluid level if it is low do not add. Check the front and rear brake pad if the pad are bad reinstall with a new and
the brake fluid return back to the fluid reservoir
and the system function and all the light on dash turn off

Jul 18, 2014 | Nissan Pathfinder Cars & Trucks

1 Answer

What does Brake light,VDC light and slip lights on . This happened when brake pedal pulsates,but I do have brake pedal.


See if the following information helpful:
1. Keep an eye on the dashboard for the indicators marked "SLIP" and "VDC Off" which will tell you the status of the computerized handling system if handling isn't normal. "SLIP" will blink when VDC is operating. "VDC OFF" means the system is off. Turn the VDC system back on if the Nissan's handling is poor by pressing the "VDC Off" button until the light goes out.

2. Adjust your driving if "SLIP" comes on. "SLIP" means the road conditions may be slippery. The VDC aids in steering and stopping, but be careful, even if VDC is engaged.

3. Remove any aftermarket suspension parts like enhanced shock absorbers if the "VDC Off" light comes on and handling is bad. The VDC system is geared for stock equipment and tires only. Use winter tires or snow chains on snow-covered roads. VDC won't substitute for the correct winter equipment.

4. Don't drive on very inclined corners with high banks and leave the VDC switch on if the handling is poor with VDC on. The system can't operate properly in that environment. Disengage VDC, or avoid those kinds of roads.

May 21, 2014 | 2004 Nissan Titan

1 Answer

The VOC Slip and brake lights come on the dash but the vehicle does not respond with any problems


Hey thereWhat kind of car do you have and what year is it. Depending what model it is, It could be low brake fluid or need a pressure switch or need the VDC repgroammed. Let m eknow

Jul 13, 2011 | Infiniti QX56 Cars & Trucks

3 Answers

If i feel a grinding of my brakes after having my lower control arm and hub bearing replaced why am I steal feeling a grinding when I mash the brakes and it was from a rod connecter broke on the truck and...


I have a 2005 Nissan Pathfinder, the VDC light and the "Slip" light came on the dash, and the slip light was coming on while i was driving at the speed of 20 mph

Jun 24, 2011 | 2005 Nissan Pathfinder

1 Answer

My brake, slip and VDC indicators stay on.


Check brake fluid level, add fluid from sealed container if needed.

Also check for leaking rear axle seals. Look for oil on the inside of rear wheels.

May 06, 2010 | 2004 Nissan Titan

1 Answer

Vdc light and brake lights comes ON.


does the master cylinder have enough brake fluid in it, low fluid level commonly causes those two lights to come on you may wanna check your brake fluid level.

Oct 07, 2009 | 2005 Nissan Quest

1 Answer

No solution yet


VDC/ OFF light is still ON only ? or also SLIP + VDC/OFF ?

if VDC/OFF only u must check ur brake fluid status if both VDC and SLIP u still have problems with ur ABS module and steering wheel


Jun 15, 2009 | 2008 Nissan Xterra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...