Question about Chrysler Cars & Trucks

1 Answer

I have a 2009 Chrysler Town & Country that had a REN radio in it and I replaced it with a RER and now it won't power up. hit eject and screen slides down and back up, then powers down.

Posted by on

  • Wesley LaBeau
    Wesley LaBeau Apr 16, 2017

    I used all factory harness's. I was told it should be a plug and play. I am getting power, radio just won't come on. Does it have to be programed by a dealer ?

  • magna buff Apr 16, 2017

    did the head unit come with a code ?
    the seller should have let you
    may need the code or diagnostic scanner
    if not
    should plug and play without a care



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chrysler Master
  • 3,828 Answers

Posted on Apr 16, 2017

Testimonial: "Awesome help and knew what to help me with. Thanks, Wes"

  • 1 more comment 
  • Wesley LaBeau
    Wesley LaBeau Apr 16, 2017

    I used all factory harness's.

  • magna buff Apr 16, 2017

    by the function button behavior ... it sort of says the wiring connection is all messed up to the function keys to the new unit to the car

  • Wesley LaBeau
    Wesley LaBeau Apr 16, 2017

    I will go out and recheck all wiring. be back shortly.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


How To Install Replace Power Sliding Door Lock Actuator Chrysler Town and...

How To Install Replace Power Sliding Door Lock Actuator Chrysler Town and Country 01-07

on Apr 05, 2012 | 2001 Chrysler Town & Country

1 Answer

No dash, radio or door activated interior lights. Checked fuses already

Dash lights (Gone?) - FSB Forums -
Sep 7, 2011 - Fully rotating the shaft counterclockwise past a notch activates theinterior lights within the vehicles. ... No aftermarket stereo, the dash lights stopped working, and my taillights ... 8 15 Courtesy/Dome/Cargo Lamps, Electric Outside Mirrors, ... 12 20 C.B. Power Door Locks, Electronic Shift Motor 4WD, Power ...

Radio died, remote system not working, door locks will not work ... > Chrysler Sebring
Aug 13, 2008 - So what all is not working at this time is: Door locks (with remote it only ... My lights on the dash dim some times and if I hit a bump the radio goes off, ... All the fuses are good, but still no power to the radio, interior lights, push ...

2009 Chrysler Town and Country No Dash instrument cluster lights ...

Jan 13, 2014 - 10 posts - ‎5 authors

Dec 21, 2015 | Cars & Trucks

1 Answer

Why can't I load a CD in the player?

The deck's electronics are shot - Will cost a fortune to have repaired if even possible. Time to move on.

Sep 21, 2015 | 2009 Chrysler Town and Country

1 Answer

2009 Chrysler Town and Country replace blower resistor

Behind the glove box. Open the box, tabs on each side to let it down.

Aug 09, 2014 | 2009 Chrysler Town and Country

1 Answer

Power door lock inoperable on driver sliding door only on 2009 town and country

Check the fuse, wires and the motor, could be some bad connection too

Mar 20, 2013 | 2009 Chrysler Town and Country

1 Answer

My 2001 Chrysler Town and Country won't accept my cassette adapter. It is Brand new and it goes in and then ejects.

I have same issue on a 2000 T&C. Was working fine for years.
Now, each tape reverses and ejects.
Any responses on this?

May 08, 2011 | 2001 Chrysler Town & Country

1 Answer

Sliding vehicle

your suspension geometry may be out, are your tyres ok? have the trackig checked on all four wheels it sounds to me as the wheels are not running true! if its wrong it can be very dangerous, get it done ASAP. hope this helps

Jan 27, 2009 | 1999 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides