At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Below is an image showing the timing marks. I circled the detail for the hole in the cam sprocket, you will look through the hole to aline the mark for the cam.
30 Nm (300 kg.cm, 22 lb.ft)+90°+Release all bolts + 30
Nm(300kg.cm, 22 lb.ft)+90°In this instance you don't have a 'Torque to Spec"... you have a "torque to YIELD'In this specification, initially torque the head bolts to 22 lb ft... then turn each and additional 90°, then loosen each and REDO to the same specification = 22 lb.ft)+90° (you're actually crushing the head gasket TWICE and stretching the head bolts TWICE.
The crank sensor on this 2000 hyundai accent is located on the leftside of engine near the rear exhaust manifold.this is if your standing on the driverside looking at the engine your left is the side the front is on, hope this helps, heres a picture to help you.
×