Question about Jaguar Cars & Trucks
Most effective way is as follows
1- Warm your car up
2- Shut off your car
3-Add the flush chemical
4- Run the car for about 15-20 minutes and make sure that you have the heater on
5- shut off the car and give it some time to cool off so that when you open the reservoir cap it will not shoot water out
6- When cooled a little open the clip that is on the radiator pipe (out going circulation.
7- Open the reservoir cap and put a water source to keep the water flowing into the coolant circulation .
8- Start your car and let the water come out till you see that it is clear
9- Close the water source and shutoff your car
Let it drain till done
10-Tighten the clip on the hose
12-Fill new coolant and make sure to get all the air out of the coolant system
13-close the reservoir cap
you are done
Posted on Aug 16, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check the oil filler cap for mayonaise. It may mean that your head gasket has gone, Go to a local garage and ask them to do a presure test on each cylinder to see if it fails on one. Have you checked the plugs for cleanness and oil contamination? that's where your problems sounds where it lies.
Posted on Aug 02, 2009
Tips for a great answer:
Dec 11, 2013 | 1985 Jaguar XJ6
Jul 13, 2010 | 1985 Jaguar XJ6
Feb 26, 2010 | 1995 Jaguar XJ6
Apr 23, 2009 | 1987 Jaguar XJ6
Apr 20, 2009 | 1995 Jaguar XJ6
Dec 03, 2008 | 1995 Jaguar XJ6
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: