Cars & Trucks Logo

Related Topics:

C
Chuck Marshall Posted on Apr 15, 2017

Location of neutral safety switch 2007 Hyundai accent

5 Related Answers

Anonymous

  • 566 Answers
  • Posted on Jan 08, 2009

SOURCE: hyundai accent, location of fuel cut off

hi from uk location of fuel safety shut off valve/switch on uk r/h drive accents is on the engine bay bulkhead in front of drivers side it is a square box with red rubber top press button may be on opposite side on l/h drives ? if activated? just press button till click ? to reset these normally only cut off on impact ? to stop elec fuel pump continuing delivering if involved in an R.T.A fire prevention

Ad

Anonymous

  • 115 Answers
  • Posted on Mar 03, 2009

SOURCE: Location of NSS(neutral safety switch) on 2002 Dodge Caravan

It is in side the trans on top of the valve body. Why do you think you need to replace it?

Anonymous

  • 1 Answer
  • Posted on May 25, 2009

SOURCE: 2004 Jeep Grand Chrokee Neutral Safety Switch Location

The switch is on the transmission..It is usually a dealer item but you can get one from Rockauto.com for about 1/4 of what the dealers charge.

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jun 15, 2009

SOURCE: Neutral Safety Switch Location

on the transmission where the shift cable attaches.

Anonymous

  • 582 Answers
  • Posted on Aug 16, 2009

SOURCE: Where is the neutral safety switch located on 1998 Town & Country

THE NEITRAL SAFTEY IS LOCATED ON THE DRIVERS SIDE OF THE TRANSMISSION WHERE THE SHIFTING LINKAGE HOOKS TO AN ELECTRICAL SWITCH THIS SWITCH CONTROLS ALL FUNCTIONS
REVERSE LTS, NEUTRAL SAFETY AND OTHER ITEMS

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How do I remove the Neutral Safety Switch on a 2002 Hyundai Accent

Pry it up with a screwdriver. If it is bad. break it. You have a new on going on. Lube it to slide it on.
0helpful
2answers
0helpful
1answer

Hyundai accent 2004 shifter is locked and brake lights do not work

Automatic transmission, right? Likely cause is the brake pedal switch located on the brake pedal arm near the firewall. This switch controls an interlock solenoid, a safety feature, that will not allow the shifter to move unless the brake pedal is depressed. Another possibility is the brake relay located on the under-hood fuse panel. Good luck.
1helpful
1answer

Inertia switch located

The ony manufacture that uses a inertia switch for the fuel pump is ford.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

0helpful
1answer

Is there a switch in the center console which would stop it from starting

Not exactly.
The neutral safety switch looks like it bolts to the transmission where the shift rod enters. You may be moving the shift rod on the trans and making the switch work.
It may crank in neutral better until you get the problem fixed.
0helpful
1answer

Need to replace both brake lights

Hi, The 2007 Hyundai Accent is under a recall for the brake light switch since it has a tendency to fail. The brake light switch is high up on the brake pedal and it has a plunger on it. The plunger releases when you step on the brake pedal and retracts when you release the pedal. Recall Information can be found at: http://www.internetautoguide.com/10-12-2007-33-267/2007-hyundai-accent-recalls.html

Please remember to rate this solution. Thanks and Good Luck!
0helpful
1answer

I cant find any servo hyundai parts model accent 2007

try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you and also try www.rockauto.com and not trying to insult you cause we use a salvage yard quite a bit and if you want you can try www.junkyarddog.com
12helpful
1answer

Hyundai accent, location of fuel cut off

hi from uk location of fuel safety shut off valve/switch on uk r/h drive accents is on the engine bay bulkhead in front of drivers side it is a square box with red rubber top press button may be on opposite side on l/h drives ? if activated? just press button till click ? to reset these normally only cut off on impact ? to stop elec fuel pump continuing delivering if involved in an R.T.A fire prevention
Not finding what you are looking for?

628 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...