Question about Mazda Cars & Trucks

Open Question

1994 Mazda b2300; seems like it is not taking the gas very well I have changed plugs wires coil packs and TPS sensor still not running good.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 378 Answers

SOURCE: 1994 Mazda b2300 still not running right, have replaced coil packs, plugs, wires, and TPS sensor. Still does not want to take throttle. Lost I have replaced all the obvious what's next the ECM???

It could be a clogged Fuel filter, clogged injectors, low fuel pressure from the fuel pump a mas air flow issue, iac needs cleaning, even a catalytic converter clogged,clogged air box tubes or air filter clogged, crank or cam sensors faulty. Do you have and codes stored that can help narrow it down for you?

Posted on Apr 27, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both coils do not fire on 1 and 4. Will start but only running on 2 cylinders. Could both coils be bad or should I look elsewhere?


Part 3 -How to Test the Ignition Module and Crank Sensor ...

easyautodiagnostics.com > Ford > 2.3L
Mar 1, 2012 - Spark plugs for cylinders #2 and #3 get spark at the exact same time. ...voltage -12 Volts) to both individual ignition coils within the coil pack. ... Ford Mustang or Ranger (or 2.3L Mazda B2300), this is what you'll need ... for this 'Switching Signal' at the coil pack... but you can also test this ... 1991, 1992, 1993.

How to Diagnose a Misfiring Cylinder (2.3L Ford Ranger ...

troubleshootmyvehicle.com > Ford > 2.3L
Apr 3, 2012 - Bad Fuel Injectors can cause a Misfire Condition. ... the ignition system on the 2.3L Ford Mustang or Ranger consists of 2 ignition coil packs, ...

2002 ranger misfire rough idle - Discussion on Topix

www.topix.com > Ford Ranger
Jul 27, 2007 - My truck is giving the code misfire in number 4 cyl. I replaced my spark plugs, Wires, Coil packs (both of them) and all my fuil ... three (3.0L v6) go bad, the fuel/air mixture gets messed up. Judged: 2. 2 ... My truck runs rough only at idle. ...code for ford ranger 2002, 2.3 5speed. truck runs like a champ but that ...

Extremely stumped! I need the best and brightest 1994 Ford ...

answers.edmunds.com > Edmunds Answers

Jan 31, 2016 | Cars & Trucks

1 Answer

1995 olds silhouette hesititates when accelerated. No engine codes. Coil packs seem fine, wires and plugs good, fuel filter and pump changed, catylitic converter fine.


Possible TPS sensor drop out/glitch.You may have to drive the vehicle with scan tool hooked up and monitor sensor operation

Oct 25, 2015 | Cars & Trucks

1 Answer

What is computer related problems consists of


bad computer will set off check engine light.you will get a PCM fault code.computer problem will cause engine run poorly no power back up mode,bad computer will cause no start problems.your problem sound like faulty TPS SENSOR.clogged fuel filter and clogged air filter.fuel injectors dirty need cleaning.

May 14, 2012 | 1994 Chevrolet Beretta

1 Answer

1994 mazda b2300 changed the head and now no spark and wont start. timming marks are all lined up


i got a94 2300 5speed and i change coils packs module crank trigger and it does not have spark after i change all that and check every fuse an ignition swicth i got no spark who cant help me

Dec 30, 2011 | Mazda B-Series Cars & Trucks

1 Answer

Truck not firing properly front coil pack not firing at all.


if this truck has an o2 sensor i would replace that and also make sure the cat-converter is not plugged,this would give you your powerloss and egr code,next is your coil,this may be caused by the computer or your crank sensor,look at the tone ring that the crank sensor uses and make sure its not missing teeth or broken,also check all your fuses.

Jun 12, 2010 | 1994 Ford Ranger Supercab

1 Answer

1995 mustang 3.8 v6 sputters on take off and at a stop in drive but not in nutural no sputer and when it gets going it runs great


ford had 3.8 engines one with distributor cap .and one with distributorless.so if you got distributor engine change distributor cap and rotor spark plugs and wires.also coil.if you got distributorless change plugs and wires .replace coil packs if they have alot of miles on them.replace fuel and air filter.also run good gas.like exxon -shell -marathon - texoco- good gas make car run better.

Jun 22, 2009 | 1994 Ford Mustang

3 Answers

95 Mazda b2300 ( Engine code p0320) misfire cyl 2


Have you replaced the spark plugs?? Use good plugs such as ngk. Look for signs of carbon tracking on porcelain (black dirt looking marks that can NOT be wiped off. If present replace spark plug and coil boot to repair.

Mar 29, 2009 | Mazda B2300 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...