Question about Oldsmobile Cars & Trucks

Open Question

I am working on replacing the left rear break line on a 95 Oldsmobile Cutlass. I want to know what is the order out of the four break lines front to rear coming out of the master cylinder hook up

Posted by on


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 8832 Answers

SOURCE: Hi I changed the master

Hi, if you plug the port, the plunger will not be able to build pressure in the front lines as the back brake section of the master will hold the plunger back. The proportioning valve will also not let you do this, as it is trying to strike a balance between the front and rear brake pressure. I'm afraid you need to repair the rear brake lines. This is not hard work, but it does require a brake line tool for cutting and flaring the lines. You may be able to borrow the tool, or check to see how much a brake place would actually charge to replace the lines. The supplies are cheap, and the labor isn't really very long--maybe a couple hours.

Posted on Feb 01, 2011


SOURCE: master cylinder brake line order

Get a hold of a repair manual for it, You can borrow them from a libarry,

Posted on Nov 27, 2012

  • 11 Answers

SOURCE: On a 90 cutlass supreme I need to know which brake

The larger reservoir is for the front brakes. If one of the brake lines is a larger diameter, it goes to the larger reservoir.

Posted on Mar 15, 2014

Testimonial: "There is no large or small reservoir. It has four ports one large and one small to the front of the master and vice versa for the back of the master near the booster. It has proportioning valves built into the master."

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I go about replacing break lines from front to rear on 2003 Oldsmobile alero

It's pretty straight-forward, but also tedious. Most lines can be purchased pre-bent. That will make your life easier.

  • Disconnect the brake line where it connects to the rubber brake line near the brakes.
  • Put a container under the hose to catch the brake fluid that drips out. The first one will drip a lot.
  • Disconnect the line at the master cylinder.
  • Connect the new line at the master cylinder.
  • Connect the new line at the brakes.
  • Repeat for all four corners.
  • Fill with new brake fluid.
  • Bleed the brake system.
It's not a fun job. Trying to get the new brake lines snaked where they need to go can be a real challenge. Plus, the fittings are probably rusted. This might be best left to a professional that has the right tools and experience.

May 04, 2016 | Oldsmobile Cars & Trucks

2 Answers

What makes the fuel pump not kick on on a 92 Oldsmobile Cutlass

There is a red wire close to the battery in the front. It's not connected to anything. Apply positive voltage and that will run your pump for testing purposes.

Dec 08, 2015 | Oldsmobile Cars & Trucks

1 Answer

I need the wiring schematics for a 1995 oldsmobile cutlass cierra

wiring schematics for what? audio?

if so

1995-96 Oldsmobile Cutlass Ciera Stereo Wiring
Constant 12V+ Orange
Switched 12V+ Yellow
Ground Black
Illumination Gray
Dimmer Brown
Antenna Trigger Pink
Antenna Right Front
Front Speakers 3 1/2" Dash
Left Front (+) Tan
Left Front (-) Gray
Right Front (+) Light Green
Right Front (-) Dark Green
Rear Speakers 6" x 9" Rear Deck
Left Rear (+) Brown
Left Rear (-) Yellow
Right Rear (+) Dark Blue
Right Rear (-) Light Blue

GM uses the same colors for all audio wires

I know a picture would have been better, but I think this could help

Aug 08, 2011 | 1995 Oldsmobile Cutlass Ciera

1 Answer

Looking to replace head gasket for a 1971 oldsmobile cutlass supreme. need to know the pressure to put back in and also if there is any special order to the bolts when installing.

You can buy a Clymers or Chilton manual with the torque specs. and the tightening order. Generaly the bolts are tightened from the center outwards in two steps. First pass you snug all the bolts down, working from the middle bolts outward to the front and rear alternating between left and right side bolts.

Mar 14, 2011 | Oldsmobile Cutlass Supreme Cars & Trucks

1 Answer

Fireing order

For the 1996 Oldmobile Cutlass Ciera:
I do not know if you have the 2.2L In-Line 4-Cylinder, or the 3.1L V6; however I have included both below.

For the 2.2L In-Line 4-Cylinder:
Firing Order:
Ignition Coil Connections:
o <---4
O.o <---1
.....o <---3
.....O..o <---2

For the 3.1L V6:
Firing Order:


Ignition Coil Connections:
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Jun 02, 2010 | 1996 Oldsmobile Cutlass Ciera

2 Answers

Coil firing order

call autozone find out the firing order.the coil is numbered.the firing is counted from left to right.(for ex. if your firing order is 316524) three would be on the left so you run that sparkplug wire to the number three on the coil,and so on.

May 18, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

I dont get any break fluid to the rear disk on either side

ABS proportioning valve is probably jammed or corroded

Apr 30, 2010 | 1994 Oldsmobile Cutlass Supreme

1 Answer

1995 Olds Ceria

Try steel rubber products, i believe they have an on line catalog.

May 09, 2009 | 1995 Oldsmobile Cutlass Ciera

1 Answer

Need to know what order to bleed the break line.

Right rear first, Left rear secound, Right front third, Left front forth.

Apr 02, 2009 | Pontiac GTO Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8830 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides