Question about Cars & Trucks

Open Question

Kubota z227 will not start

Where is the stop switch located

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Lincoln vantage 300 diesel welding machine with kubota engine when I go to start it will start then shut right off but if you hold in start button it will run Need Help

check the operation of the start switch as the circuit to keep it running ( stop solenoid circuit) is not operational
could be a fuse in that circuit or a broken/ missing wire

Jan 24, 2017 | Lincoln Cars & Trucks

2 Answers

Kubota smokes blue then nocks when idled down no power lose only 200 hrs this started after oil change used all kubota parts and oil

The only time I've seen something like this is when somebody forgot to empty the old oil out before adding new oil. Have you checked the oil level?

Feb 27, 2016 | Cars & Trucks

1 Answer

I recently bought a 1995 kubota m5400 tractor, when i got it it wasnt running. i put a new battery in it and attached the postive and negative wires to it and bam it started right up. i drove it around the...

As it went for a period of time I suspect that the fuel system has a problem. I take it that it is a diesel being a kubota. When diesel sits unused for a period of time gunk grows in the fuel tank. I suspect that this gunk has now blocked the fuel filter or that there is air in the system that has to be bled out. I would also check that the stop solenoid on the fuel pump is working to allow it to start.

Nov 12, 2014 | Cars & Trucks

2 Answers

Need wiring diagram for Kubota t1770

check grounds first & then have starter & battery tested

Oct 27, 2014 | Cars & Trucks

1 Answer

Kubota problem slows down then stops then start up and slowly fuel comes back

check for venting problem in the tank cap or vent on top of the tank

Aug 31, 2014 | Cars & Trucks

1 Answer

Kubota zd21

Just unplugging the seat switch will not disable it, it will make it stay open all of the time. You have to un-plug it and make a jumper wire to complete the circuit and make it think the switch is made.

Aug 23, 2014 | Cars & Trucks

1 Answer

Kubota troubleshooting

Check the cables going to the battery. Make sure you have a good ground and a good connection to the starter.

Jun 07, 2017 | Cars & Trucks

1 Answer

Starter stays engaged or blows a fuse when I try to start my skid steer

This could be the starter or the ignition switch, Take the starter out and have it tested. IF the starter tests ok, replace the ignition switch.

Jan 06, 2014 | Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides