Question about Cars & Trucks

Open Question

What is the difference between 4L30 & 4L30-e - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im getting ready to pull the transmission out of my 95 isuzu trooper with the 3.2l engine 4x4. Im not to smart about the inside of them, does the 4L30e have tranny bolts th hold the housing to tranny


why not login in to mitchell DIY, (goggle it ) and read.
or go to any online, 4L30 parts house and read.
lots of those, can all found easy using "GOOGLE"
here.
search, (4L30 parts)
3rd hit MAKCO
see the graphic there, click it.

http://www.makcotransmissionparts.com/4L30E.html

you need to remove the TC, bolts first
the bell housings bolts to the engine,
those come off, with tranny jack in place.
all the steps are in the service manual.
4wd.
quote (a wall of text, why not buy the book?)

& Transfer Case Automatic Transmission Transmission Removal 4L30-E Transmission

4L30-E Transmission(removal

Print
4L30-E Transmission
Disengage the oxygen sensor connector from the transmission wiring harness connector

Disengage the oxygen sensor connector from the transmission wiring harness connector
Detach the selector lever end of the shift lock cable from the lever assembly by loosening the adjusting nuts and sliding the end out of the bracket

Detach the selector lever end of the shift lock cable from the lever assembly by loosening the adjusting nuts and sliding the end out of the bracket

Disconnect the shift control rod from the selector lever lower lever arm

Disconnect the shift control rod from the selector lever lower lever arm

Remove the oil pipe clamp bracket from the engine stiffener

Remove the oil pipe clamp bracket from the engine stiffener
Make certain to tighten the transmission-to-engine mounting bolts to the proper amount of torque-the torque measurements are shown in parentheses

Make certain to tighten the transmission-to-engine mounting bolts to the proper amount of torque-the torque measurements are shown in parentheses


NOTE

The transfer case is an integral part of the transmission housing. Although the 2 cases can be separated, the transfer case should be removed with the transmission.

Use a felt-tipped marker to matchmark the hood to the hood hinges. Remove the hood.

Disconnect the negative battery cable.

Shift the transmission into the N position, and the transfer case into the 2H position.

Remove the air cleaner assembly.

Remove the transfer case shift knob. Remove the 4 transmission cover console retaining screws.

Remove the center console assembly and disengage the console switch wiring connectors.

Disconnect the shift lock cable and the shift control rod from the selector lever assembly.

Unbolt and remove the transfer case control lever.

Raise and safely support the vehicle on jackstands.

Remove the transmission and transfer case skid plates.

Remove the exhaust pipe protectors.

Drain the transmission fluid. For more information servicing the transmission fluid pan and filter, refer to Section 1.

Label and detach the oxygen sensor connectors.

Remove the catalytic converter, center exhaust pipe and front exhaust pipe, as described in Section 3.

Matchmark the front and rear driveshafts to the differential and transfer case flanges.

Unbolt and remove the front and rear driveshafts, as described later in this section.

Disconnect the oil cooler lines from the transmission. Plug the lines to prevent fluid loss and contamination.

Remove the brackets securing the oil cooler lines to the engine stiffener.

Remove the front suspension crossmember.

Remove the dipstick and tube. Disconnect the breather hoses from the tube.

Remove the 5 engine stiffener bracket bolts and the stiffener bracket.

Remove the heat protector.

Disengage the transmission harness connectors and the mode switch harness connector from the engine harness.

Disconnect the harness clamp from the clamp bracket.

Disconnect the ground cable from the engine.

Remove the starter motor, as described in Section 2.

Remove the flexplate inspection cover.

Remove the 3 bolts securing the flexplate to the torque converter. Turn the crankshaft to gain access to all 3 bolts.

NOTE

Remove the radiator upper fan shroud and the cooling fan to access the crankshaft center bolt to turn the crankshaft.

Place a suitable transmission jack under the transmission and transfer case unit for support.

Raise the transmission slightly and remove the 8 bolts securing the rear mount and the transmission crossmember.

NOTE

Make sure the engine and transmission assembly is properly supported before removing the rear mount and third crossmember.

Raise the engine slightly with an engine hoist and remove the transmission-to-engine bolts.

Separate the transmission from the engine and lower the transmission from the vehicle.
end removal quote

Mar 04, 2017 | Isuzu Trooper Cars & Trucks

1 Answer

Code u2100- u2105


U2100 - GM Type Network - Manufacturer Controlled DTC - Manufacturer Controlled Description CAN Bus Off (4L30-E Transmission) Conditions
Cause Key on and the TCM detected a loss of communication on either Communication Area Network (CAN) Bus line for one second

--------
U2103 - GM Type Network - Manufacturer Controlled DTC - Manufacturer Controlled Description CAN Bus Reset Counter Overrun (4L30-E Transmission)
Cause Key on and then the TCM detected a loss of communication on either CAN Bus line that exceeded 40 time out requirements


---------------
U2104 - GM Type Network - Manufacturer Controlled DTC - Manufacturer Controlled Description CAN Bus Reset Counter Overrun (4L30-E Transmission)
Cause Key on and then the TCM detected a loss of communication on either CAN Bus line that exceeded 40 time out requirements
------------------
U2105 - GM Type Network - Manufacturer Controlled DTC - Manufacturer Controlled Description CAN Bus Error ECM (4L30-E Transmission) Conditions
Cause Key on and the TCM did not receive ECM messages for 1 second

BUT, THERE IS NO FAULT CODES RESULT FOR U2101 AND U2102
or you can ask the 24 hrs live technical support was multi-diag, they will like to help you, good luck

Aug 14, 2013 | 2005 Isuzu Ascender

2 Answers

Auto Trans 4l30-E Slips in 2nd and 3rd gear


its repair manual

PDF]GENERAL MOTORS Hydra-Matic 4L30-E automatic transmission

scottj.info/files/isuzu/4l30e.pd
code 22 tps can either be set in volts or non replaceable
code 53 is fault in transmission control module

code 51 is a issue ( note particular vehicle configuration.)
http://repairpal.com/gm-obd-code-51

replacement transmission and its ECU should be fitted and matched together
or a diagnostic scanner used to reconfigure the modules

did you actually test drive the replacement transmission
before fitting to the truck

Mar 06, 2017 | Isuzu Cars & Trucks

1 Answer

2002 izuzu axiom w / 4L30-E transmission wont go into 4th gear downshifts to any gear at its own by itself


The place to start would be to pull diagnostic codes.If I was going to guess i would say a bad output speed sensor.Almost any trans code stored will inhibit fourth gear so guessing is tough.Good luck.

Mar 06, 2011 | 2002 Isuzu Axiom

1 Answer

318i 1999 e46 wil not select 4th unless you select 3rd first


the tranny will need to be reprogrammed or have an update

Oct 23, 2009 | 1999 BMW 318 ti

1 Answer

Looknig to get spec for TCC solenoid resistance on a 2000 Isuzu Trooper LS.


AW30-40LE
11-15 ohms at 20 degrees Celcius
12-16 ohms at 40 degrees Celcius
4L30-E
18-20 ohms

Jul 27, 2009 | Isuzu Trooper Cars & Trucks

1 Answer

Engine swap


The 4JX1 used the 4L30-E automatic transmission behind it...I think the 4JA1 has a different centerline measurement on the bellhouseing.. if thats the case an adapter plate would be needed.
It can be done, but it's probably not going to be cost effective,

May 23, 2009 | 1999 Isuzu Rodeo

1 Answer

What is the transmition Oil capacity for 1998 trooper?


Automatic Transmission, Total Fill----4 speed 4L30-E..........9.2 quarts

Manual Transmission, ..........5.7 pints

Mar 30, 2009 | 1998 Isuzu Trooper

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...