Question about 2006 GMC Canyon

1 Answer

The 2006 GMC canyon, I have no brake lights. Switch at pedal is working and voltage present, no voltage getting to the lights. All turn signals, parking and hazards are working, just no brake lights.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • GMC Master
  • 372 Answers

Check the bulb sockets for rust.

Posted on Apr 18, 2017

Testimonial: "Already resolved, had corrosion on the brake pedal switch. Cleaned it up, works great. Thanks!"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E-brake won release on a 2006 GMC Canyon


Ok tell me this is the pedal stuck all the down on the e-brake. If so if you look under the dash on the e-brake follow the pedal and you can see where it locks and all yo have to do is press pedal and with a screw driver release lock on the pedal. Good luck

http://parts.nalleygmc.com/showAssembly.aspx?ukey_assembly=392045&ukey_product=2577448

Mar 02, 2014 | 2006 GMC Canyon

1 Answer

Break lights are not working


check on top ot the brake pedal is the brake switch that is the most comun problem.

Sep 26, 2012 | 2006 GMC Canyon

2 Answers

Brake lights dont work, changed the fuse its was ok, changed the switch on the pedal , still not lights. flashers work, turn signal work, but not the brake lights. where to look next


Hi, your van does not use the signal filaments for the brake lights. You must have a wiring issue. Check for power at the brake light switch. If you have power there, the wire is broke from the switch to the S304 junction. If there is no power to the switch, the wire is broken between the fuse box and the switch. Please let me know if you have more questions, and thanks for using FixYa.

jturcotte_2135.gif

Aug 27, 2011 | 2003 Dodge Caravan

2 Answers

I own a 2005 GMC Canyon Five CYL and the cruise control stopped working last niight. You push the button and no cruise. I checked the fuse and it is ok I exchanged with another 10AMP and no change still...


Start with the simple and check the fuses and the Stop lamp switch. Check your brake lights, if they're not working, the cruise won't work either. If they're not working, check the fuse for them, if the fuse is fine, then take it into the dealer, there's been a recall issued on the brake switch, so it should get fixed for free.
Cruise Control Disengaged
The powertrain control module (PCM) disengages the cruise control operation based on the signals from the following switches:

* The stop lamp switch
* The TCC brake/cruise release switch
* The clutch release switch, if equipped
* The cruise control On/Off switch

The TCC brake/cruise release switch and the stop lamp switch are mounted on the brake pedal bracket. When the brake pedal is applied, the normally closed TCC brake/cruise release switch opens and the normally open stop lamp switch closes. The PCM detects a low signal voltage on the TCC brake/cruise release switch signal circuit and a high signal voltage on the stop lamp switch signal circuit. When the clutch pedal is applied, the normally closed clutch release switch opens and the PCM detects zero voltage on the CCP switch signal circuit. The vehicle speed stored in the memory of the PCM will be erased when the cruise control On/Off button is turned OFF, or the ignition switch is turned OFF.

The Cruise Control System will disengage when the PCM detects that a driver override function has been active for approximately 60 seconds .

When the Cruise Control System is disengaged, the PCM sends a class 2 message to the instrument panel cluster (IPC) in order to deactivate the cruise control indicator.

Cruise Control Inhibited
The powertrain control module (PCM) inhibits the cruise control operation when any of the following conditions exist:

* A cruise control related DTC has been set.
* The vehicle speed is less than 40.2 km/h (25 mph) .
* The vehicle is in PARK, REVERSE, NEUTRAL, or 1st gear.
* The engine RPM is too low.
* The engine RPM is too high, with fuel cut off.
* The vehicle speed is too high, with fuel cut off.
* The system voltage is not between 9 volts and 16 volts .
* The Traction Control System (TCS) is active for more than 2 seconds .

Thank you for using Fixya and start with replacing the stop lamp switch. Even though the brake light work, it;s been known for that switch to cause your issue. that's way there was a recall for it.

Apr 01, 2010 | 2005 GMC Canyon

1 Answer

How do I replace a 2006 gmc canyon brake light switch myself?


yes you can.... it is a plunger style switch located near the brake pedal inside the car

Feb 28, 2010 | 2006 GMC Canyon

1 Answer

2005 Canyon turn signal problem


No, but that's probably where your problem is. The wires get the hell beat out of them by stones, and then they short out and cause problems. I would take a look at it.

May 06, 2009 | 2005 GMC Canyon

2 Answers

Brake light switch


In the 04 models there has been a recall on a part in the brake lights. You can look it up and it gives you a number to call GMC. If you truck is one of the affected models they will replace it for you.

Aug 25, 2008 | 2004 GMC Canyon

3 Answers

Trailer wiring for 06 GMC Canyon 4x4


exactly what does it do? please explain what happens when you press the brake turn on the light than brake signals ect.....

Aug 13, 2008 | 2006 GMC Canyon

Not finding what you are looking for?
2006 GMC Canyon Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...