The transmission range (TR) switch is part of the park/neutral position (PNP) and backup lamp switch assembly, which is externally mounted on the transmission manual shaft. The TR switch contains four internal switches that indicate the transmission gear range selector lever position. The powertrain control module (PCM) supplies ignition voltage to each switch circuit. As the gear range selector lever is moved, the state of each switch may change, causing the circuit to open or close. An open circuit or switch indicates a high voltage signal. A closed circuit or switch indicates a low voltage signal. The PCM detects the selected gear range by deciphering the combination of the voltage signals. The PCM compares the actual voltage combination of the switch signals to a TR switch combination chart stored in memory.
SOURCE: wiring diagram or fuse box diagram-2007 GMC Envoy Denali
Hi there;
Here is the wiring diagram for the trailer wiring for your truck.
Hope this helps
Farrout!
SOURCE: neutral safety switch
It is located on the side of the transmission, follow the shift cable down to it you will recognize it because it has a electrical wire comming off it and either a shift lever or shift cable going to it.
SOURCE: Where is the fuel fillter on my 2007 GMC Envoy
Hello f poll: My name is Roger and I will help you. There is no fuel filter that you can easily get to. GM did not install a replaceable filter. The only filter for your GMC is located inside the fuel tank. To replace it would require removal of the fuel tank. What that means is this. When you replace the fuel pump you will replace the filter at the same time. The pump and the filter are a module unit. Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger
SOURCE: 2006 GMC Envoy Denali, Universal Garage door
GOTO HOMELINK.COM TO DOWNLOAD INSTRUCTIONS FOR THIS SYSTEM
YOU WILL NEED TO RE PROGRAM THE UNIT WITH YOUR DOOR OPENER.
HOPE THIS HELPS
1,153 views
Usually answered in minutes!
×