Question about 1995 Toyota Camry
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Their are two fuses that power this system. One is a 15 amp gauge fuse and the other one is a 30 amp main power fuse. You can also check the power main relay, your ignition switch, or i could possibly be a fault in the wiring
Posted on Mar 11, 2009
if you can here relays when unlocking/locking check for power at door lock actuators inside doors, if you have power on lock/unlock and good earth from connector actuators are faulty.
if no power on test light when operating check output from central door lock module while operating, none coming out of module then it might need replacing.
check 30Amp power fuse for main relay under bonnet (which goes to pin 8 white/blue on module)and 10Amp gauge fuse in cab(pin 1 blue/red on module),pin 15 is also power when relay is on(red/blue) with test light, and module/ actuators.
check outputs from module pin 3 & 4
that go to door locks
Posted on Jul 20, 2009
a relay is not going to blow the fuse. it is just basically a switch, from which a large load is controlled by a smaller load. the most likely reason that it blows a fuse is the window motor itself is shorted. replace this
Posted on Feb 21, 2010
This may be the location: There
is a power main relay, it's located on the rear of the junction block in the left side of the dash behind the cover, on the front are the fuses and on the rear is the relay, it's the one closest to the center of the car, there are two other relays, these are identical so you could swap one of them and see if that fixes the problem.
If that doesn't do it, one cheap way to find this info is a Chilton manual at the library.
Posted on Mar 16, 2011
It could still be the relay, if the solenoid is working but the contacts are faulty. There are also several other places in the circuit which could cause this. Follow the diagnostics from p90 on, here
Posted on Jun 25, 2012
Tips for a great answer:
Jun 25, 2012 | 1995 Toyota Camry
Aug 27, 2010 | 1995 Toyota Camry
Mar 15, 2010 | 1995 Toyota Camry
Sep 30, 2017 | 1995 Toyota Camry
Oct 02, 2009 | 1995 Toyota Camry
Sep 06, 2009 | 1995 Toyota Camry
Jul 20, 2009 | 1996 Toyota Camry
Apr 12, 2009 | 1999 Toyota Camry
Mar 14, 2009 | 1995 Toyota Camry
Mar 11, 2009 | 1996 Toyota Camry
125 people viewed this question
Usually answered in minutes!