2004 mitsubishi endeavor shakes while in idle and upon acceleration.. doesn't struggle.. makes a knock noise every now and then (hoping nothing major).. went to a couple mechanics.. heard different prices and what they believe the problem is.. I am in NYC.. would really appreciate a solution so I wouldn't look so puzzle, more then likely makes me an easy target.. would like to know exactly whats going on and tell them exactly what needs fix without them telling me about my brakes or aixle. thank you.

PLEASE HELP! SOS! car starts but doesnt move! - Club3G Forum ...

www.club3g.com > ... > Performance & Tech Forums > Problem Reports

Nov 16, 2010 - 61 posts - ‎14 authors
now yes, i will take the transmission is fubar into consideration but theres an .....however... idk about my cv joint, my car ONLY would make a loud ping noise when i move from a stop or brake ..... almost always when i put it into reverse. such as an engine mount sound, ... Vehicle: 2004 Eclipse Spyder GT. Loud knocking sound after oil change..
14 posts
Sep 20, 2010
Horrible noise upon start when cold
21 posts
Dec 24, 2009
Sporty knocking.. Oh noez!!one!!1!
16 posts
Mar 22, 2006
More results from www.club3g.com

Loud thump when I shift into drive or reverse - CarGurus

www.cargurus.com > Questions > Chevrolet > Cavalier

CarGurusDec 19, 2012 - And while driving loud thump when car motor shifts th... ... Bad throttle position sensor can trip both lights and make the transmission shift at high rpms and shift hard even under light acceleration. .... the transmission will shift hard when firstput into reverse or drive ... 2004 Chevrolet Cavalier LS For Sale.Missing: mitsubishi ‎eclipse

Mitsubishi Transmissions & Drivetrains Repair Questions ...

Could be the drop links

tick or knock ???

tick could just be valve train noise that either could be adjusted out or live with it

engine knock, well hopefully you dont have payments

Could be catalytic con.in side.

I would like to hear the noise.so I can have a idea what it is .please

Loose/worn Constant velocity joints (CV Joints) on the outer drive axles maybe. have a front wend shop check them,.

It just may be the tires. Tire cupping will make a roaring noise. You can check for this with your palm. Run you hand over the tread of the tire while parked. Look and feel for cups or scalloped dips appearing around the edge of the tread on one side or the other.

if the fluid level is low it can cause problems with gear shifting, top up the fluid level & see if that makes a difference.......hope this helps......cheers.

Hi,
Looks like the drain pipe/tube from ur A/C blower housing is blocked and need to be cleaned out!
Look for that rubber tube, pull it out and use any flexible wire to clean out the molds and grimes!
hope that clears up everything!
Taaah!

poss torque converter lockup chatter , have codes checked , poss needs trans flush with mitsu sp3!! atf only ,or some type of mount or carrier bearing maybe worn