At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The torque specifications for the flywheel and clutch on an Opel Astra 1.4L 2012 with the A14XER engine are as follows:
Flywheel bolts:
Stage 1: Tighten to 20 Nm (15 lb-ft)
Stage 2: Tighten an additional 70 degrees (or 2/3 turn)
Clutch pressure plate bolts:
Tighten to 22 Nm (16 lb-ft)
It is important to use a torque wrench to ensure that the bolts are tightened to the correct specification, as over-tightening or under-tightening can cause damage to the components and affect the performance of the vehicle. Additionally, it is recommended to use new bolts when installing the flywheel and clutch to ensure proper torque and avoid any potential issues caused by worn or damaged bolts.
motormounts may b worn or car needs tuneup-change plug wires--coil--distributer cap........causing misfiring---cud hav an injector issue tu doing the same thing---------
Hi, Have a diagnostic scan done and also a mechanical error trace ,
the solution to the problem could be the CKP crankshaft position sensor or a wiring related issue, it could also be the fuel pump , the pump relay , engine management actuator . In order for your engine to start it requires the following:
Compression
Fuel pressure and volume
A proper spark
Correct valve timing and ignition timing
A decent battery vitally important as all engine management relies on it.
Hope this helps a bit
Regards Higgins.
×