Question about 2002 Ford E350

2 Answers

1987 motor home ford e350 460 driver side tire to much campor but no adjustments are listed in repair manual. is something bent

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Be certain of the wear you are experiencing, if one side is getting wear or one side of one tire a worn or loose caster adjuster on the upper ball joint is very likley. Worn ball joints are also very common on these vans. No grease fitting on a ball joint is a sure failure in as little as 40 or 50,000 miles. Thats an 800 dollar grease fitting.

Posted on Jul 27, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,071 Answers

Springs settled common for ford you could either change yor spring or try spring rubbersto hold front end up higher or your ball joints could be bad

Posted on Jul 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can not get the caster on the left side to adjust to specs. has new upper control arm and +/- 2 degree adjusterts and caster will not go below +5.5.


There has to be something bent. Lower control arm look oK? Any sign of fame damage? Spindle look ok? Caster is generally not a tire wear factor. However, the vehicle will pull to the side with most caster and least camber.

Jan 20, 2016 | 2004 Ford Explorer Sport Trac

1 Answer

Bent frame on right front wheel.....need to know the name of the piece.


Borrow a repair manual for your vehicle from the libarry,

Dec 05, 2012 | Cars & Trucks

2 Answers

Can i adjust bent or toed out front wheel on 82 bronco?


The toe is adjusted by the tie rod ends connected to the gear box.
Some adjustment is possible where the tie rod ends connect.

Jul 13, 2012 | Ford Cars & Trucks

2 Answers

How do I adjust doors for 2002 ford explorer sport


You can loosen the bolts that hold the hinge to the door and to the body and make some adjustment. I would suspect that you'll need to replace the hinges, most likely part of the hinges may have bent. Also check for any damage to the door where the hinges attach.

May 08, 2010 | 2002 Ford Explorer Sport

1 Answer

Front end alignment 1987 ford bronco


That is a camber problem. most likely Axle Pivot Bushings, or lower ball joints.

May 21, 2009 | 1987 Ford Bronco

2 Answers

Rear tire wear


Sounds like your alignment is out, take it and get it balanced, If not that then something has broken in the rear end causing your tire to wear wrong

Feb 09, 2009 | 2005 Ford F-150

2 Answers

What is correct tire pressure for 1987 supra


look on the metal part of the inside door frame on either the driver or pasenger side. it will tell you there. should be around 32psi if stock tires

Jan 19, 2009 | 1987 Toyota Supra

1 Answer

Rear brake light & brake light on in 1991 ford 350e motor home


change your shock the tire is bouncing up and bown

Dec 27, 2008 | 1999 Ford Expedition

2 Answers

1989 ford probe


if you loosened the strut bolts then you have to take it and have it aligned because it will wear the inside of your tire real fast

Jun 15, 2008 | 1989 Ford Probe

Not finding what you are looking for?
2002 Ford E350 Logo

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...