At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Are you saying the engine will not crank, or crank but will not start ? None of the engine sensors come into play until after the engine is cranking. Cranking problems can include the neutral safety switch and other factors with the crank circuit back to the key switch.
Bad ignition switch? Maybe? I have the same problem and I'm going to replace the ignition switch today before I start trying to trace electrical issues (which could be anything and take forever).. Hoping the switch is the fix...
this is what your check engine light was telling you. code 12 battery input was disconnected within the last 50 key-on cycles. code 54 no camshaft signal detected during engine cranking. code 55 completion of fault code display on check engine lite. hope this will help you!! note: camshaft sensor is located in distributor on 3.0liter engine and on a 3.3liter and 3.8 liter engines its located next to the thermostat housing.
p0352 is ignition coil #2 primary circuit..the engine controller had these circuit problems in this model year..also have seen a crank sensor cause this fault also..if it's not the crank sensor,most likely engine controller
×