Question about 1995 Mercury Villager

1 Answer

My Mercury Villager 2005 model....the parking lights is not working again ? Is there a fuse specifically for this.....also the DIM control light for the Dash board included but the Head lamps are working perfectly

Posted by on

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 4,369 Answers

If just in rear not working, you need to replace lamp sockets, they go bad. easy repair.

Posted on Aug 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No break lights, 1999 villager


Check 20A fuse 51 in the fuse junction panel. This feeds power to the brake pedal position switch which, when closed, turns on the high mounted stoplamp and the rear park/stop lamps. The brake pedal position switch could be defective.

Jan 01, 2014 | 1993 Mercury Villager

1 Answer

Tail lights and dash lights is no working


did you check them in the dark to see if , not just dim?
what sub model, EX, or LX? the LX is very different.
the car has 2 fuse boxes. did you know that, most cars do.
the fuse is called fuse #10 (fuse 10 runs hazards too, are haz dead?)
box one in cab, and 2 in engine bay.
the HAZ fuse is marked, HAZ

park/dash dim all dead, this is the largest path in car, over 20 lamps on most cars. (lots of places to mess up)
all are dead, all parks, front , rear, side and cab (dim) dead??????
even the license plate lamp>>>> details?,,,,, help, im blind..
here ill login to alldata.com for you, so can you at anytime.

ok this car can have a tail light relay. the LX dont have one.
the combo switch (1st click ) turns on park(tails)
and the relay energizes and runs all the park lamps.
but not on the LX, the LX is switch direct drive to all parks.
so?????

found this with google. NON LX !!!

Fuse #10 (15A) Audio unit, pocket light, clock, climate control, cruise switch light, gauge assembly, hazard switch light, heater control panel, interior lights switch light, driver's multiplex control unit, power sliding doors switch light, rear A/C switch light, taillight relay TCS swtich light.





Dec 30, 2013 | 1999 Honda Odyssey

1 Answer

Dome lights dim when the fan turns on


Go through all the switches and controls and make sure everything is turned off, wait 15 minutes and try again. A battery in good condition may recover enough to start the engine. Driving the car for an hour or so in daylight may recharge the battery.

Aug 23, 2013 | 2000 Mercury Villager

1 Answer

1997 Mercury villager left headlight doesn't work.


go here. we can help you. Also, did you check the headlamp relay in the box under the hood? One relay is in box in front of battery, other is in narrow box along passenger side fender under the hood. swap left & rt headlamp relays to see if it changes.

http://groups.yahoo.com/group/villagerquest/

Jul 13, 2009 | 1995 Mercury Villager

1 Answer

98 mercury villager breake light


There may be an adjustment on the switch, not sure, but hope it helps a little

May 25, 2009 | 1998 Mercury Villager

1 Answer

1998 Mercury Villager Break light switch


go here for help. http://autos.groups.yahoo.com/group/villagerquest/

Brake light circuit goes through turn signal switch. Do turn signals work ok? Does high mount stop lamp do this too? If you disconnect brake switch, do the lights go off? Do you have trailer tow? Maybe that wire is an issue. I would check brake switch first again. Maybe out of position.

I think you need to adjust the switch.

Installation
  1. Install the BPP switch.
  1. Adjust the BPP switch. Refer to the procedure in this section.
  1. Tighten the BPP switch locknut to 12-15 Nm (9-11 lb-ft).
  1. Connect the BPP switch electrical connector.
  1. Connect the battery ground cable.
Section 17-01: Lighting, Exterior 1998 Villager Workshop Manual
ADJUSTMENTS Brake Pedal Position (BPP) Switch
  1. Measure the distance between the brake pedal stopper and the threaded end of the brake pedal position (BPP) switch. The BPP switch height (A) should be 0.3-1.0mm (0.012-0.039 inch).


ce51ecc.gif

  1. If the BPP switch height is not within specification, loosen the BPP switch locknut.
  1. Adjust the BPP switch until the height is within specifications.
  1. Tighten the BPP switch locknut to 12-15 Nm (9-11 lb-ft).
STOPLAMPS Condition Possible Source Action
  • Stoplamps/Rear Hi-Mount Lamp Inoperative
  • Fuse.
  • Circuit.
  • Brake pedal position (BPP) switch.
  • GO to Pinpoint Test Step K1 .
  • One or More Stoplamps Inoperative
  • Stoplamp bulb(s).
  • Circuit.
  • GO to Pinpoint Test Step L1 .
  • Stoplamps/Rear Hi-Mount Lamp On Continuously
  • BPP switch.
  • REPLACE the BPP switch.


f4078b8.gif

Apr 20, 2009 | 1998 Mercury Villager

Not finding what you are looking for?
1995 Mercury Villager Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...