Question about 2002 Hyundai Accent

1 Answer

I plan on changing the timing belt on my wife's 2002 Hyundai Accent 1.5 litre. I've got a repair manual that says to take off the water pump pulley, but it doesn't say how to get at the bolts that hold it in place. There's no room to get a socket or wrench in there. What to do? Rob

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Hyundai Master
  • 2,007 Answers

I'm not sure about your's in particular, but many of them you have to remove the wheel, and the inner fender panels.

Posted on Jul 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i replace a water pump on a 2002 hyundai accent gs dohc 16v?


THE WATER PUMP IS NORMALLY LOCATED AT THE FRONT OF THE ENGINE, DRIVEN BY A PULLEY.

Jun 20, 2015 | 2002 Hyundai Accent GS

1 Answer

Hii..... I am from kerala. . Planning to buy a hyundai accent CRDi 2005 model.. vehicle completed185000kms till now.. engine reset done at 140000kms... is it a gud option to buy that vehicle?? What all...


Hyundai makes a very good, low problem car. They don't seem to have any issues that other cars don't, and with proper maintenance, should easily get over 350,000 km. Timing belts and water pumps are common as well as basic maintenance items like oil changes and brake pads. Good luck!

Nov 08, 2014 | Cars & Trucks

1 Answer

H my name is carl my 2002 Hyundai accent will crank over everything comes on but wont start there's no spark,and no power to fuel pump and i changed the crank shaft position sensor and still nothi


Have you checked the timing belt, it is most likely has stripped out teeth and not turning the camshaft(s). Pull the belt cover off the front of the engine and see if the camshaft pulleys rotate when cranking the engine over.

Sep 18, 2012 | 2002 Hyundai Accent

1 Answer

I need to know how to replace a water pump on a 2002 hyundai gx 350.


2002 Hyundai XG350 3.5L MFI DOHC 6cylWater Pump - Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Drain the cooling system.
  3. Remove or disconnect the following:
    Negative battery cable Accessory drive belts Water pump pulley Timing belt, tensioner and idler pulley Water pump

  4. 1514f36.jpg

    Fig. Water pump assembly-XG 300 and XG 350 (click over pic for zoom)

To install:
  1. Clean all mating surfaces of any residual gasket material.
  2. Install or connect the following:
    Water pump with a new gasket and torque the bolts to 16 ft. lbs. (22 Nm) Tensioner and timing belt and idler pulley Water pump pulley and drive belts Negative battery cable
  3. Fill the cooling system to the proper level.
  4. Start the vehicle, check for leaks and repair if necessary.
To install:
  1. Clean all mating surfaces of any residual gasket material.
  2. Install or connect the following:
    Water pump with a new gasket and torque the bolts to 16 ft. lbs. (22 Nm) Tensioner and timing belt and idler pulley Water pump pulley and drive belts Negative battery cable
  3. Fill the cooling system to the proper level.
  4. Start the vehicle, check for leaks and repair if necessary.

95486b3.jpg


Fig. Water pump bolt lengths-3.5L engine

Install the water pump with new gaskets and O-rings. Tighten the bolts to the following specifications:
  1. 1.5L SOHC engine: 105-132 inch lbs. (12-15 Nm).
  2. 1.5L DOHC engine: 14-20 ft. lbs. (20-27 Nm).
  3. 1.6L DOHC engine: 14-20 ft. lbs. (20-27 Nm).
  4. 1.8L, 2.0L, and 2.4L engines: 14-20 ft. lbs. (20-27 Nm).
  5. 2.5L engine: 11-16 ft. lbs. (15-22 Nm).

Hope helps (remember rated this).

Jun 18, 2010 | 2002 Hyundai XG350

1 Answer

Changing timing belt on hyundia accent


Make sure the crank pulley is lined up with the top dead center mark. The make sure the crankshaft is lined up with its mark. Its easier if you can line the marks up before you take the old belt and try not to move the crank shaft are cam pulley.

Apr 17, 2010 | 2002 Hyundai Accent

2 Answers

I need 2004 Hyundai XG350L Service/repair Manual


3.5L Engine

Remove or disconnect the following:
  1. Negative battery cable
  • Engine coolant
  • Water pump pulley bolts
  • Alternator bolt, loosen only
  • Water pump pulley and drive belts
  • Crankshaft pulley
  • Timing belt cover(s)
  1. Turn the crankshaft until the timing marks on the camshaft sprocket and cylinder head are aligned.
  2. Loosen the timing belt tensioner bolt and turn the tensioner counterclockwise as far as it will go. Tighten the adjusting bolt.
  3. Mark the timing belt with an arrow showing direction of rotation.
  4. Remove the timing belt.
  5. If defective, remove the timing belt tensioner.

9767b45.gif
Timing belt sprocket alignment mark positioning for belt removal and installation—3.5L engine

To install:
  1. If necessary, install the timing belt tensioner.
  2. Attach the top of the tensioner spring on the engine coolant pump pin. Ensure the hook on the pin is facing down and the hook on the tensioner is facing away from the engine
  3. Rotate the timing belt tensioner to the extreme counterclockwise position. Temporarily lock the tensioner in place.
  4. Align the timing marks of the camshaft and crankshaft sprockets.
  5. Install the timing belt on the crankshaft sprocket, then onto the rear camshaft sprocket.
  6. Route the belt to the coolant pump pulley, the front camshaft sprocket and the timing belt tensioner.
  7. Apply force counterclockwise to the rear camshaft sprocket with tension on the tight side of the belt and check that timing marks are aligned.
  8. Loosen the tensioner bolt 1–2 turns and tighten the timing belt to a tension of 57–84 lbs. (260–380 N).
  9. Turn the crankshaft two turns clockwise.
  10. Readjust the sprocket timing marks and tighten the tensioner bolts.
  11. Install the timing belt covers.
  12. Install the crankshaft pulley and tighten to 108–116 ft. lbs. (150–160 Nm).
  13. Install or connect the following:
    • Timing belt cover(s)
    • Crankshaft pulley
    • A/C compressor belt
    • Water pump pulley
    • V belt
    • Negative battery cable
    • Engine with coolant

Feb 10, 2010 | 2004 Hyundai XG350

1 Answer

How do u change a timing belt on a 2002 Hyundai Accent?


Go to the autozone website at autozone.com and register your car. It's free and will give you access to an online repair manual for your car. The steps and procedures for changing the timing belt can be found there. ( I checked). Hope this helped and best wishes.

Jul 31, 2009 | 2002 Hyundai Accent

1 Answer

A/c and power streering belt how do I intall i think im missing


here is the diagram for your car. I hope this helps.
0900c15280196fd5.jpg

Apr 10, 2009 | 2000 Hyundai Accent

1 Answer

Does a Hyundai 2002 1.6L DOHC have a timing belt or chain? If it's a chain, does it need to be replaced?


If you have an Accent which I believe that you do, it has a belt which needs to be changed every 60-80k miles. This vehicle has what is called an interference engine which basically means that if the belt breaks, the engine will continue to turn BUT the camshaft stops. If any of the valves are open the piston will slam into the open valve (interfere) and you will be looking at a new engine. I would recommend changing the water pump at the same time as well as the tensioner. I would also have the pulleys inspected by a professional mechanic and replaced as needed. If you just change the belt and the tensioner or the pulleys are weak then you can have premature breakage.

Nov 21, 2008 | 2002 Hyundai Accent

Not finding what you are looking for?
2002 Hyundai Accent Logo

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...