Question about 2000 Hyundai Accent

1 Answer

2000 hyundai accent code 302 misfire and slow responce o2 senser

Car has intermtant misfire and slow start o2 senser code check engine light starts flashing when has misfire

Posted by on

  • Anonymous Mar 20, 2014

    Check light stays on and it says acs off.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

Yep!.. Typical with an engine cylinder misfire. Inspect the plug and ignition wire, especially the insulator. If you see a 'christmas tree' pattern on the insulator, that's where your problem is.

Posted on Oct 19, 2009

  • Barry Jensen Jul 09, 2013

    new plugs and leads have been fitted

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 05 Suzuki Forenza that has a flashing check engine light. This started on Tuesday. Had the codes looked up. Car is driving shaky and dash lights are blinking. Any ideas?


fix the anti freeze leak --before you blow a head gasket

what your codes mean

Check Engine Light On, P0300 Random Misfire Code. A random misfire means your engine is misfiring, but that the problem is not isolated to one or two cylinders. It is jumping around in a random way from one cylinder to another. A random misfire code usually means the air/fuel mixture is running lean.

What the P0700 code means. P0700 is set when the PCM detects a malfunction in the transmission control system. This malfunction causes the vehicle to set a Check Engine Light and trigger a failsafe mode. Once the failsafe mode is set it will remain until the fault is repaired or normal operation is detected.

PO133 Oxygen Sensor Circuit Slow Response (Bank1, Sensor1)

Nov 25, 2016 | Suzuki Cars & Trucks

2 Answers

I was driving home on the interstate at 70 miles an hour in 5th gear and my car started jerking. why????


The engine has developed a misfire,most likely. Did the check engine light come on or start flashing? If so, find out what codes has set to determine which cylinder is misfiring and then proceed with the repair.

Feb 26, 2015 | Cars & Trucks

1 Answer

O2 senser trouble


duplicate question

Jul 01, 2013 | Cars & Trucks

1 Answer

Engineliteremainsonafternewo2sensor


If the code means the O2 sensor is not switching from rich to lean, you may have a fuel problem or a vac leak. When the sensor is warmed up, it should switch back and forth from lean to rich several times per minute.

Aug 29, 2012 | 2001 Hyundai Accent

2 Answers

97 ford escort check engine light flashing uses alot of gas replaced plugs


what engine if a zetec engine then change the O2 sensor

May 06, 2011 | 1999 Ford Escort

1 Answer

I have a 2002 Hyundai Accent 16 valve with a PO300, 301, 302 & 304 code. Loss of power to the point the car died on the highway. After a few minute and with the throttle wide open, I can restart the...


Take it to "Autozone" and have them scan the system,this will give you an idea, of whats needed and where to start looking. This service is allways free, and worth its weight in gold.

Feb 26, 2011 | 2002 Hyundai Accent

1 Answer

My check engine light is on and everytime i get gas my car will not start. to get the car to start i have to give it gas. i had it scanned and the check engine light is on because i have a bad evaporative...


The evap solenoid is on the charcoal canister in the fuel evap system, The no start problem can be resolved by replacing the Purge Control Valve, Hyundai p/n 28910-22040. These are warranty items. The O2 sensor trouble code was probably from the over rich fuel mixture caused by the other problems. Wait til after the other items are fixed and then watch for the O2 sensor trouble code to reappear.

Jan 03, 2011 | 2007 Hyundai Accent GS Hatchback

1 Answer

Code reads that o2 senser was bad i replaced it and now i think i have a vac leak how do i find out


use a wet cloth around the pipes for air leaks.any change it engine tone denotes leak.

Apr 25, 2010 | 2000 Hyundai Accent

Not finding what you are looking for?
2000 Hyundai Accent Logo

Related Topics:

1,011 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...