Question about 1995 Nissan Quest

1 Answer

Tie rod repair estimate

What's a decent estimate to get tie rods repaired on a '95 Nissan Quest?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 410 Answers

You didn't say if you were looking for inner/outer or for one side or both so I'm going to give you inner and outer for both sides, because you should get them both done if you have one done. For the inner tie rod you should look to pay $200-350 and for the outer tie rods you should look to pay $175-275. Check out this website http://repairpal.com/. It is a great place to find out how much you should expect to pay for many common repairs. You will see a range and that is because it takes into account the small shops and the dealers. Let me know if you have any further questions. Thanks for rating my response and for using FixYa!

Posted on Jul 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace tie rod ends on an Xterra


Special tools are necessary to replace tie rod ends. After the tie rod ends are replaced, it is mandatory to have an alignment done.

Sep 29, 2014 | 2002 Nissan Xterra

1 Answer

How do u repair the inner tie rod


Tie rods have replacable ends. You will need a tie rod end seperator, commonly called a "pickle fork". total length of the tie rod from ball joint tip to tip should be noted so that when you put the new end on, you can get it close enough to drive the car to the alignment shop for the needed front end alignment.

Jan 23, 2011 | 1993 Nissan Maxima

1 Answer

How to replace tie tods on a 2001 and should both tie rods have a grese fighting or just one. and how to get the bands off to remove the boot .


ok, Tie rods don't have boots. The only thing up front with a boot is the CV joint. You have to use a cutter to remove the bands from a CV joint however, unless your trying to repair the joint you don't want to do that. There is no lubrication point inside the boot you need to reach. If for some reason you need to remove that boot you need to get a CV joint Boot Repair kit to do this as it will have replacement bands to use in the repair. Because of the nature of a CV joint and it's importance to operating correctly I don't recommend trying to do a Joint repair on your own. On the Tie Rod typically you will replace the out end. You need to have a tie Rod puller to remove the tie rod end off the "A" frame after you have released the lock nut in the center then simply unscrew the tie rod end. You'll want to make sure you mark the old tie rod somehow so you can put beside the new part and mark it so you know how far to screw that in so the Alignment matches, as close as possible. The tie rod puller is a special tool you can get from Auto Zone to remove the Tie rod end from the "A" frame.

Oct 27, 2010 | 2002 Chrysler PT Cruiser

1 Answer

Tie rod replacement


sounds really high to me, what is the parts cost here, what is labor rate?

Feb 11, 2010 | 2003 Nissan Altima

1 Answer

How much does it cost to repair a tie rod on a 2003 nissan altima


Depending if power/streeing or manuel/streeing.
Inner tie rod $50.00 - $150.00 each part only.
outer tie rod $30.00 - $75.00 each part only.
labor 1.0 flag rate on outer tie rod per side.
labor 1.3 flag rate on inner tie rod per side.
Flag rate X shops hourly rate = labor cost.

Dec 27, 2009 | 2003 Nissan Altima

1 Answer

Estimate for new battery tire rod repair and 4 new tires for the 2004 Chrysler Pacifica


The tie rods are part of the steering system not connected to the battery. If you have an estimate from a shop it should show a battery on a different line than a tie rod or tie rod end. Tires vary greatly in price depending on size, use and brand. Many tire dealer websites hae do-it-yourself tire pricing allowing you to choose different options.

Dec 14, 2009 | 2004 Chrysler Pacifica

1 Answer

How to change left front tie rod on nissan quest


Loosen the wheel lugs, jack up the vehile,use jack stands under the frame for safety, remove the tire.Turn the steering wheel hard right.Now I am assuming you want to change the outer tie rod on the steering rod.Or maybe the inner.
Then loosen the nut and bring the nut up to be flush with the tie rod joint.
Now either with a splitting tie rod fork (you can rent one from a local parts store free) hammer it tight between the ball part of the joint and the tie rod, it should pop off from the taper lock.
If not give a few sharp raps with good sized hammer and will break it loose.
You can get a manual from your local library on the vehile to help .

Oct 24, 2009 | 2004 Nissan Quest

1 Answer

How to remove inner tie rods on a 95 Tracer/Escort wagon


You need a special tool that slides over the inner tie rod after removing the outer ones.make sure you count the turns to remove the outer tie rods so the alignment will be close. You will need to have it aligned after the repair.

Jan 29, 2009 | 1994 Ford Escort

2 Answers

Replacing tie rod on 2006 nissan sentra


1_11_2013_12_51_42_pm.jpgFOR A "2006 NISSAN SENTRA" & ANY OTHER MODEL THAT HAS A SMOOTH SOCKET HOUSING, WITHOUT A RATCHET END TO USE A CONVENTIONAL INNER TIE ROD REMOVER TUBULAR TOOL... THIS IS THE TOOL YOU HAVE TO USE... I FOUND ONE AT AUTO ZONE AS A LOANER TOOL...

Dec 10, 2008 | 2006 Nissan Sentra

Not finding what you are looking for?
1995 Nissan Quest Logo

Related Topics:

1,135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...