Question about 2004 GMC Envoy

2 Answers

Low beams on 2002 trailblazer won't turn on?

My youngest daughter played in the front seats and turned my low beams off and I can't get them back on. All of the other lights work, fog lights, running lights, and high beams all work but I can't figure out how to get the low beams or the day time running light to turn back on, any help would be much appreciated. And trust me she won't be playing in Mommy's car any more...

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This happen to me before theres a blown relay it cost about $40.00 at the GMC dealership. This relay cannot be bought at autozone or anything like that must be bought at GMC. You can switch the relay with the fan relay to test this. Hope it helps...

Posted on Oct 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 202 Answers

Something might be broken inside. Those things are very easy to break try playing with it

Posted on Jul 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the low beam relay on a 2002 Chevy Trailblazer?


under dash above brake pedel the charm box the relay is be side it

Jan 24, 2015 | 2002 Chevrolet TrailBlazer

1 Answer

Why would my Low beams stopped working


If both fuses aren't blown or the lights themselves aren't blown. Then it is the turn signal switch or the wire that goes from the switch the the low beams. I have replaced many switches for GM. But not on Trailblazers.. I just did one for the high beams not working. It was the wires. I just ran a new wire from the switch to the lights.

Aug 06, 2014 | 2002 Chevrolet TrailBlazer

1 Answer

2002 Ford Focus SE. Low beams won't go on sometimes. Hi beams work no problem. Turn back to low, they stay on for a few seconds then turn off. Should I be looking at the headlight switch on the da


I would start at the headlight switch check your ground wires and connections at the light themselves also check the bright dim switch

Aug 27, 2012 | 2002 Ford Focus

1 Answer

Low Beam headlights won't come on at night, but


Most likely Relay #46 in the underhood fuse panel is bad, try swapping it with #45 to isolate problem.

Sep 03, 2011 | 2002 Chevrolet TrailBlazer

2 Answers

Audi A4 2002 Low beams & Right front turn signal stopped working


For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram.
First fuse on first row from left upper corner is Fuse Nr.20 = F20 (15A) - RH headlamp low beam, headlamp adjustment.
First fuse on second row from left upper corner is Fuse Nr.21 = F21 (15A) - LH headlamp low beam, headlamp adjustment.

Feb 15, 2010 | 2002 Audi A4

1 Answer

How to change front headlamp bulb? Low beam


  1. Open the hood.
  2. Remove Grille.
  3. Remove the 2 retainers on back of headlamp assembly and remove the headlamp from the sheet metal panel.
  4. Remove the access cover from the rear of the headlamp.
  5. Disconnect the electrical connector from the socket.
  6. Rotate the bulb and socket counter clockwise in order to remove the bulb and socket from the housing.
  7. Disconnect the electrical connector from the socket.
  8. Remove the bulb and socket from the headlamp.
Installation Procedure Important: • Replace a high beam bulb with another high beam bulb. The high beam bulb has a black socket. • Replace a low beam bulb with another low beam bulb. The low beam bulb has a gray tip and a grey socket.

Oct 14, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

How do change a low beam bulb on a 2003 Chev Trailblazer?


you pull it out from back or screws on front and take out whole ***.

Sep 30, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

2002 trailblazer low beams won't turn on


Pull the release on your emergency brake, if its not all the up the daylights will remain off.
By pressing the emergency brake down one notch or pulling up one notch it turns off the daytime running lights while it is being serviced.

Jul 24, 2009 | 1998 Volvo S70

1 Answer

Low Beams Don't Work!


There is more than one relay I know but make sure your bulbs are good I HAVE seen this happen more than once.. low beams can go at once.. and still have hi beams check this first please .. Jerry

Apr 22, 2009 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
2004 GMC Envoy Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...