Question about 1993 Jeep Grand Cherokee

2 Answers

Vacumn line on top of front end on 4 wheel drive goes where

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Are you sure it is a vacume line or just a front diff vent. if a diff vent just cable tie it up high so no water gets into it as you drive through water

Posted on Jul 24, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

That is not a vacuum line it is a breather hose. It just needs to be kept up.

Posted on Jul 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I know if its the 4w actuator causing my problem


If you can jack up the car off the ground and start it and put in drive if the front wheels are turning and you have the lever in 2 wheel drive then yes it's stuck, check the vacumn lines that run to front wheels to see if they have cracked or fallen off. This model is vacumn operated so follow lines under hood and check them all

Jan 21, 2015 | 2002 Kia Sportage

1 Answer

Engine problem 1999 Ford Escort 4 cyl Front


Sounds like you make have a vacumn leak on one of the rubber vacumn lines that attach to the intake manifold. Check all of these lines and look for cracks, pinholes and lines that have colapsed.

May 08, 2010 | 1999 Ford Escort

1 Answer

1995 DODGE RAM 2500 4WD ENGAGEMENT PROBLEM!!!


You have vacumn lines the run to your transfer case and then to the vacumn motor on the front axle. you need to check the lines and connections. If vacumn is working fine, then motor on front axle is bad.

Apr 10, 2010 | 1999 Dodge Ram 2500 4WD

1 Answer

1991 Jeep wrangler 2.5 standard shift.vacumn lines from transfur case to front drive axle.we need a picture of where each vacumn hose goes. a print out of the colors. thank you


i just boought a 1992 Jeep Wrangelr sport with a chevy 305 V8 and its a automatic with a standard 4 wheel drive and i put in 4 wheel drive and the front tires wont move what is wrong????

Mar 11, 2010 | 1990 Jeep Wrangler

1 Answer

Front wheels don't work in 4 wheel drive


I assume this has auto hubs. There should be either a plug going to the front axle, or a plug with vacumn lines on it. Either way the contacts should be cleaned first. Start there and let me know. It ends up with dirt and debris and interfers with the contacts. Billy

Jan 11, 2010 | 1995 Nissan Pathfinder

1 Answer

4WD Not Working - No Vacumn From New Transfer Case Switch


do you have vacumn at the t/c switch when engine is running if not trace the line back to the engine also that line tees off to the vac ball

Dec 31, 2009 | 1990 Chevrolet S-10 Blazer

1 Answer

4 wheel drive wiil mot engage


check the hoses on the front axle they are what really engage the 4 wheel to the front axle check for cracks or replace entire line i had that problem before sometimes not enough vaccum pressure

Dec 14, 2009 | 1987 Dodge Pickup 2WD

5 Answers

4/04 ford f150 4x4 front axle actuator won' t stay disengaged


Even though you checked the vacuum lines and found no leaks it does not mean there isn't a problem. The check valve in the line closest to the firewall actuator is probably your problem. Had the same issue replaced this line and solved it. The check valves in the vacuum lines are your best next guess.

Jun 09, 2009 | 2004 Ford F150

1 Answer

4 wheel drive light is on in my jeep


vacumn pod on the front axel is stuck on. Jack up the front wheels spin both tires at the same time and see if the front drive shaft turns. If it does the 4x4 on the axel is engaged. The front drive shaft on these should not turn when vacumn pod is disengaged. YJ's have a split axel on the right side inner axel shaft.

Apr 10, 2009 | 1992 Jeep Wrangler

2 Answers

Front drive, 4 Wheel drive won't engage


that vacume line goes back to the transfer case, the end that goes behind the motor hooks to a steel tube so it does not get hot from the exhaust., my guess it should be hooked up so it will feed vacume to the vacume ball so it can lock in the axels. if you start the car and shift into 4 wheel drive and listen under hood you should hear a hissing sound, that is vacume, if you can't hear it there, you may have to craw under the right side to hear it, probably came unhooked underneith the car

Feb 01, 2009 | 1995 GMC Jimmy

Not finding what you are looking for?
1993 Jeep Grand Cherokee Logo

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...