Question about 1991 Toyota Camry

Open Question

1991 Toyota camry 2.0 4cyl. cranks over no spark new distributor, new engine computer,new plug wires,new ignition switch, still no spark. help dave

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 18 Answers

SOURCE: How do I change the 3 spark plugs on the back of engine

The upper intake has to be taken off to get to them. Yes it is a pain in the but, not too hard to do, just bothersome to do this to be able to change plugs. Make sure to be careful when loosening the intake as the head is aluminum and you can damage it if you take a gung-ho approach. You will need to replace the gasket but it is only around 12 -15 $ .

Posted on May 08, 2009

Ad
  • 11 Answers

SOURCE: 1990 Toyota Camry just stopped running has no spark but has fuel.

check the main fuses under the hood to see if any are blown

Posted on Jul 23, 2009

GARYca
  • 672 Answers

SOURCE: No spark, 1988 Toyota Camry 3SFE 4cyl, 5 speed.

there is no crank sensor on this vehicles 2.0L. If you have power to the coil, new coil, cap and rotor try this if not done yet>>>Unplug coil power first....Try pulling off the distributor cap, and make sure the rotor is spinning with the cam...If this fails to spin, inspect the entire distributor assembly. If it passes, Inspect all the power circuit and wiring to the dist assembly, if ok possible ecu. i recommend having a mechanic check it out!! Hopefully this helps...please rate...thanks

Posted on Aug 11, 2009

Murphybanton
  • 2004 Answers

SOURCE: when 1991 toyota camry is cold it cuts off when taking off

check the fuel pump.

Posted on Sep 01, 2009

nvannoy
  • 234 Answers

SOURCE: 1993 toyota corolla, problem no spark to spark

Check the ignition relay and all the main relays on the battery.

Posted on Jan 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Engine stop


If theres no spark from the spark plugs then you would have to replace them?

Jul 12, 2008 | 1993 Toyota Corolla

3 Answers

After replacing plugs, wires, coil, ignition modual, and computer, I still don't have spark.


take the cap off the distributor and have someone crank if over, it rotor doesnt turn, distributor is bad.

Aug 18, 2010 | 1991 Chevrolet Suburban

3 Answers

Car wont start, not getting spark


crankshaft sensor, or computer on toyotas then it was usually the distributor or the computer, but the crankshaft sensor might be bad too thats what helps to get you spark.

Jul 31, 2010 | 1991 Toyota Corolla

1 Answer

No spark, 1988 Toyota Camry 3SFE 4cyl, 5 speed.


there is no crank sensor on this vehicles 2.0L. If you have power to the coil, new coil, cap and rotor try this if not done yet>>>Unplug coil power first....Try pulling off the distributor cap, and make sure the rotor is spinning with the cam...If this fails to spin, inspect the entire distributor assembly. If it passes, Inspect all the power circuit and wiring to the dist assembly, if ok possible ecu. i recommend having a mechanic check it out!! Hopefully this helps...please rate...thanks

Aug 11, 2009 | 1988 Toyota Camry

1 Answer

Car started running bad with no power.So put fuel injection cleaner in and car started running better.So drove it about 20 miles and car went dead going about 30mph and would not crank back up, what is...


If this is a 4 cylinder, then its most likely the coil. Take out a spark plug and crank the engine to see if you have a good spark. If you don't have a spark, in order, replace the distributor cap and rotor, and replace the coil. If your ignition wires are old, replace them as well.

If its a 6 cylinder car, there is a separate coil for each cylinder, so your problem is more difficult to diagnose. In that case, if no cylinders are firing it may be the ignition computer or the ignition switch.

Jun 28, 2009 | 1996 Toyota Camry

Not finding what you are looking for?
1991 Toyota Camry Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85108 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...