Can any direct me on how to replace a proportioning valve on a 96 protege? I had a brake line failure now the drivers side front caliper WILL NOT bleed no matter what i do. The dealer said it was the proportioning valve. Any help?
SOURCE: bleeding brake on a 2002 mazda protege 5
Start from the furthest away from the master cylinder and work your way forward..And make sure who is helping you bleed them they hold the brake to the floor and dont let up until you've tighten the bleeder screw..And make sure your master cylinder is full every time you bleed one tire so that you dont run out getting more air in the systems..Hope this helps you and Have A Great Day
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_a3369546f8067589
SOURCE: how to adjust caliper for rear brakes on a Mazda Protege Es.
on the rear calipers there is a 14m bolt on the back of the caliper beside the parking brake braket.
remove bolt on the inside there is a hex screw. as you turn it the piston gose in or out.
check calipers for damage.
SOURCE: I have 97000 miles on my 96 Mazda Protege LX. How
The belt shold be checked at 60,000 don't let it go past 100,000 Without replacing you you will be buying a new engine.
SOURCE: I need to bleed the
How to Bleed Brakes
easy steeps and recommendations
http://www.wikihow.com/Bleed-Brakes
http://www.popularmechanics.com/cars/how-to/maintenance/4213448
SOURCE: valve clearence settings mazda protege 2003
This is for a non turboNew adjustment shim =Removed shim thickness+ measured valve clearance- STANDARD VALVE CLEARANCE (0.26 mm or 0.010 inch)
87 views
Usually answered in minutes!
×