Question about 1993 Isuzu Rodeo

2 Answers

To remove crankshaft harminic ballance lock bolt is it left or right hand thread Glen.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 850 Answers

Anti clockwise when facing the engine !
Its will be very tight so fit a socket with a braker bar & rest it on the chassis rail the clck starter [on & offf quickly] but make sure it cxant hit anything else!!!
Cheers Rob

Posted on Jul 24, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

THAT'S A EASY WAY TO FOUND INF. OBOUT CARS JUST GO TO AUTO ZONE .COM AND SING UP IN ACOUNT WHIT THEM THEN GO TO REPAIR GUIDES AND YOU GOING TO FOUND WHAT YOU ARE LOKING FOR

Posted on Jul 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't remove crankshaft damper bolt from 2001 Taurus OHV


try using the impact gun again only this time set it on do up tension as the bolt may be a left hand thread lock bolt /nut.

Mar 23, 2014 | Cars & Trucks

1 Answer

Is the crank shaft pulley on a renault 1.5 megane left/ or right hand thread


They'd be right hand threads-regular threads-to loosen, turn counter clockwise. An air impact wrench is best for removing the crank bolt. Or a long breaker bar and socket on the bolt, if you can hold the crankshaft stable so it doesn't turn backward with pressure on the bolt. You can pull the starter off, and wedge a big screwdriver or prybar against the flywheel's ring gear teeth, then turn the bolt with the breaker bar.

Jul 13, 2012 | Renault Megane Cars & Trucks

2 Answers

We r strugeling to remove the crankshaft pully and we now un shaw if its a left or right hand thread??


it is a regular thread but you almost need an impact wrench to remove bacause they put them on tight at the factory

Feb 14, 2011 | 1984 Jeep CJ7

1 Answer

Can't get the crank pulley loose. is it left our right threads. i am replacing the water pump.


TURN CRANKSHAFT BOLT COUNTERCLOCKWISE TO LOOSEN. YOU HAVE RIGHT HAND THREADS.ENGINE TURNING CLOCKWISE.YOU NEED A STRAP WRENCH HOLD CRANKSHAFT PULLEY WHILE LOOSEN IT.BUT YOU NEED A CRANKSHAFT DAMPER REMOVAL TOOL.OR HARMONIC BALANCER REMOVAL TOOL.YOU NEED STRAP WRENCH TO HOLD CRANKSHAFT PULLEY WHEN TIGHTEN IT.TORQUE CRANKSHAFT PULLEY BOLT 90 - 98 FT LBS. MAKE JOB EASIER.HAVE A HELPER HOLD STRAP WRENCH WHEN YOU LOOSEN OR TIGHTEN CRANKSHAFT PULLEY.

Sep 19, 2010 | 1995 Mercury Villager

2 Answers

Daewoo Matiz crankshaft pulley


remove the outer small bolts to remove balancer(pulley) the big centre bolt holds crankshaft gear for timming belt which slides off with timming belt removed.

Sep 10, 2009 | Daewoo Nubira Cars & Trucks

2 Answers

Crankshaft Pulley..98 Subaru Forester


just a socket set will do the job.But remove the bolt and put thread lock-tight on the threads and tighten to manufacturers toque

May 30, 2009 | 1993 Buick Park Avenue

1 Answer

Is the crankshaft pulley aright or left handed thread


The bolt in the middle is usually counterclockwise. Standard thread removal.

Feb 19, 2009 | 1998 Ford Ranger SuperCab

Not finding what you are looking for?
1993 Isuzu Rodeo Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...