Question about Dodge Stratus

2 Answers

I have a 2003 dodge stratus engine studdered so I pulled over turned car off the on and car ran fine but now the engine light is on and error code reads p0016 this has been going on for a year and we would just turn the car off and it would start back up and go just fine and the engine light would go out after it sat for a night. well it did not run fine this last time so we just replaced timing belt and water pump crank and cam shaft sensors car was running fine and then we started it after shopping and engine light came on and my wife went to take of and the engine studdered. this is the same reason it we replaced every thing the first time. any help engine code is p0016 again I tink the shop is going to tell me its the ECM now

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 202 Answers

This poo16 is cam/crankshaft sensor if u change it already and still the same maybe a loose connector or the cable are shorting

Posted on Jul 24, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you bought the cam/crank position sensors from an aftermarket retailer it is a very good possibility that there bad because most of the electronic parts sold by Autozone, Car Quest and Napa are only tested for one vehicle then sold for any vehicle they will fit and will cause problems as most vehicles have different setups for the computer controlled timing. I work in a dealership garage and have run into this problem often I'm not saying thats what the issue is I'm simply saying its a possibility. Try replacing your parts with genuine parts from a dealer or have the dealer fix it and see if that helps.

Posted on Aug 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix code 1598 2001 dodge stratus


The link below shows Dodge error codes:
https://www.engine-light-help.com/dodge-check-engine-light.html

Your error code indicates A/C Pressure Sensor Voltage Too High.

It probably is due to either a short or grounding of a wire/switch/sensor. Do the things you can do yourself - check all earth wires around the ac unit. Clean and tighten them.

If your ac works fine, ignore the code.
If not - don't waste time and money changing bits in an attempt to solve the problem. Visit a workshop

Feb 25, 2016 | 2001 Dodge Stratus

2 Answers

Where is bank 1 sensor 2 located at on 2003 dodge stratus wit a 2.4 engine ?


    Dodge Chrysler - YouTube

    ? 2:54
    https://www.youtube.com/watch?v=vs2DuvehVGA
    Oct 31, 2013 - Uploaded by 1A Auto Parts
    I want to know about a Dodge Stratus 2002 sensor. ... I have a 05 Chrysler 300 2.7 engine with a fault code ... images for Where is bank 1 sensor 2 located at on ...


    More images for Where is bank 1 sensor 2 located at on 2003 dodge stratus with a 2.4 engine

    Where is bank 1 sensor 2 located at on 2003 dodge stratus wit

    www.fixya.com/cars/t26025690-bank_1_sensor_2_located_2003_dodge
    22 mins ago - SOURCE: check engine light is on...bank 1 sensor1 oxygen sensor. if u have one .... 2.7L dodge stratus/ #1 bank #2 sensor location? on 2004 Stratus. Oct 24 ... How can I set the timing on a 1996 dodge stratus 2.4l engine.

    P0137 02 Sensor Circuit Low Voltage - OBD-Codes.com


Dec 28, 2015 | Dodge Cars & Trucks

1 Answer

Dodge stratus troubleshooting


you need to see what trouble code was set when the check engine light came on

Jul 04, 2014 | 2004 Dodge Stratus

1 Answer

My 2001 dodge startus transmission wont shift, speedometer works, engine light is on. Need help?


Transmission is in limp mode. This enables you to drive the car to service. Anytime there is a transmission code in the computer even if nothing is wrong it will stay in limp mode until the code is erased. Most retail auto parts stores will run an obd2 diagnostic scan to determine the problem and erase existing codes, no charge (Auto Zone, Advance and others)

May 14, 2014 | 2001 Dodge Stratus

2 Answers

Dodge Stratus 2003 Error Code P0340


Here's a link to your code.Here's a video to watch,may similar to your engine.

Sep 12, 2013 | Cars & Trucks

1 Answer

How do i find error codes on my 2003 dodge stratus 4 cyl dohc


Turn your ignition key on and off three times then on the fourth time just leave it on and watch where the millage numbers are it will show you the error codes.

Oct 09, 2012 | 2003 Dodge Stratus

1 Answer

Engine cuts out @2400 rpms


Check the crank sensor. This is very common for this problem. Best wishes!

Aug 16, 2009 | 2002 Dodge Stratus

1 Answer

03 stratus missin upon accelaration


I think you should OBD 2 scan and see if it is miss fire ign wires are usually bad this time of year! scan it before you guess that adds up quick$$$$$$$$

Dec 23, 2008 | 2003 Dodge Stratus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

683 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...