Question about 1999 Lexus RX 300
This is a lenghty job!! You would have to remove the plastic engine cover to locate the plugs (cover that has the lexus symbol). There are 3 coils(black squarish units) on the front head and another three in the rear head. You must remove these to access the sprakplugs. Front is very easy!! The rear is difficult, you would have to remove the intake(special tools are needed) to access the rear coils and sparkplugs. hopefully this helps
Posted on Jul 24, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
follow the big rubber hose from the radiator to the engine. the top readiator hos. If at the engine there is two bolts holding down the hose connection housing, You found iit. If not there, look on the block end of the lower host.
Posted on May 23, 2009
SOURCE: where is the ignition coil
the back plugs are under the intake plenum. Tey can be changed without pulling the plenum but for a novice it may be easier to remove the plenum. The fronts are under the engine cover that says v-6...3000..v v t i, etc. Remove that cover and you will either see three coils or three wires. The plugs will be under those.
Posted on Oct 15, 2010
/* Style Definitions */
mso-padding-alt:0in 5.4pt 0in 5.4pt;
font-family:"Times New Roman";
mso-fareast-font-family:"Times New Roman";
Lift the hatch. The tall center light is located behind the
upper hatch inside panel. There are two
panels need to remove. One panel is on the right, the other on the left. To
remove the panels you have to use flat screw driver to pry out the panel in
several locations. (These panels are secured by several small metal clips.) Be
careful to collect all these clips and replace them on the back of the panel.
You will need these clips to replace the panel later on. After remove the panels,
you will be able to locate the screws on the tall center stop light assembly. Remove
those screws and cover. After replacing light bulb. Assemble everything in
reverse order. Remember, the metal clips have to set on the back of the two
panels not the car body.
Posted on Aug 18, 2009
Tips for a great answer:
Sep 11, 2017 | Lexus Cars & Trucks
Aug 22, 2017 | Lexus Cars & Trucks
Aug 09, 2017 | Lexus Cars & Trucks
Jul 17, 2015 | 2003 Lexus RX 300
Oct 15, 2010 | 1999 Lexus RX 300
Jan 25, 2010 | 2002 Lexus RX 300
Dec 29, 2009 | 2000 Lexus RX 300
Oct 04, 2009 | 2001 Lexus RX 300
Sep 12, 2009 | 2000 Lexus RX 300
1,518 people viewed this question
Usually answered in minutes!