SOURCE: 2007 Chrysler 300 won't shift
It is the pink park lock out devise. Try here: http://www.custombilletstore.com/product_p/1028.htm
You can purchase the fix and do it yoruself to save cash. Dealer will charge you over $100 to replace the whole area with more cheap plastic.
SOURCE: 2007 chrysler sebring will not
It is your shifter assembly. Should be able to take the trim panel off and use something to press the bypass switch to get it out of park. I've seen a bunch of these go bad.
SOURCE: diagnostic Troubleshooting Codes for 1996 Chrysler Sebring Cvtble
FIRST YOU TURN IGNITION SWITCH ON WITH ENGINE OFF.LOOK AT MIL LIGHT IT SHOULD COME ON 3 SECONDS THEN GO OFF IT NOT THEN YOU GOT BURN OUT BULB OR A CIRCUIT PROBLEM.IF ALL IS WELL. ATTEMPT TO START ENGINE.TURN OFF IGNITION. WITH OUT STARTING ENGINE.TURN IGNITION ON OFF ON OFF AND WITHIN 5 SECONDS RECORD 2 DIGIT DIAGNOSTIC TROUBLE CODES.DISPLAYED BY FLASHING MIL LIGHT.YOUR MIL FLASHES WILL BE YOUR CODE LIKE THE MIL LIGHT FLASHES 5 TIMES THEN PAUSE FLASHES 3 TIMES THAT CODE 53 THAT YOUR CODE.IT LIKE MORSE CODE.WHEN DONE TURN OFF IGNITION SWITCH.GO TO AUTO ZONE OR ADVANCE AUTO GET HAYNES COMPUTER CODE BOOK. TO GET CODE MEANING OR WHAT SENSOR GONE BAD.HOPE THIS CAN BE SOME HELP.
SOURCE: re chrysler sebring gear stick stuck
how do you replace the pink pawl on 2007 chrsyler sebring
SOURCE: chrysler sebring won't shift out of park
See if this helps. Someone on LXforums had the same problem with their
300. This solution worked for me as I had the same problem as you with
my Chrylser Sebring 2007.
http://www.lxforums.com/board/showthread.php?p=1538277
87 views
Usually answered in minutes!
×