Question about 1998 Chevrolet S-10 Pickup

2 Answers

98 blazer random multi misfire, bank one lean.

When the engine is cool it runs well. After short trip, it begins to load up ,skip, studder, and black smoke. Engine light was originally not coming on, once it did it said multi misfire/ bank one lean. For some reason the light went out, but problem still exist

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Mine did the same thing i changed the oxygen sensors both and gave it a full tune up plugs wires cap rotor button cost u about 100.00 plus i changed both oxygen sensors at 54.00 a piece fixed it

Posted on Jul 26, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,627 Answers

Replece the distributer cap and rotor button

Posted on Jul 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 chevy silverado p0171 ; p0174; p0300


Sounds like you have a serious vacum leak.; DTC 0174 and 0174 are lean conditions on bank 1 and bank 2, 0300 is random misfire. The only thing I can think of is a big vacum leak like the brake booster / vac line leaking, or maybe the intake manifold is cracked ... even a stuck-open EGR doesn't normally lean a motor that much. Start by checking for a vacum leak, if the motor will idle you can spray a little WD-40 around ports and lines >> if the idle speeds up or becomes smooth you on the right track in the area you judt sprayed.

Feb 26, 2015 | 2000 Chevrolet Silverado

1 Answer

98 lincoln conttinental running lean stalling out


Check for vacuum leaks. if misfiring address the misfires as this will cause O2 sensors to detect more oxygen in the exaust system. Check you MAF sensor and clean if dirty

Sep 29, 2012 | 1998 Lincoln Continental

2 Answers

Engine codes po300,po420,po430,po446 is what codes poped up when hooked up on computor.


300 is multiple cylinder misfire, 420 is catilytic convertor no good and 446 is an evap problem

Feb 06, 2011 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

I have a 2000 Hyundai Sonata that runs rough when you start it up. I hooked a code reader to it and it said that system was lean on bank 1 and multi misfire and not reading 02 sensor on bank one. I have...


time to get the engine properly scanned, real time not code scanner, then you will have the readings from sensore and actuators, diagnose from there

Dec 14, 2010 | Hyundai Motor 2004 Sonata

3 Answers

2003 Ford Ranger 4x4 extended cab- diagnostics checked and got these codes- P0171, P0174, P0300, P0316. Can you tell me what they mean?


P0171------ system too lean bank#1
Po174------ system too lean bank#2
For these 2 codes, try cleaning the maf sensor (mass air flow), that is mounted in the big black hose that goes from the air filter housing to the throttle plate, if it is dirty, that will cause those 02 sensors to send a signal to the computor to lean the air fuel mixture. If cleaning it doesn't work, the sensors will probably need changing.
P0300---- Random/multiple cylinder misfire
P0316---- Cylinder misfire at start up---- first 100 revolutions.
On those 2 codes, you have to do some testing to find out why there is a misfire.
Possible causes:
dirty/malfunctioning injectors
weak coil pack
fowling spark plugs/wires
Low fuel pressure

May 11, 2010 | 2003 Ford Ranger Regular Cab

3 Answers

Check engine light


A multi misfire may mean that one or more of the following has happened:
Faulty spark plug or wires, Faulty coil (pack), Faulty oxygen sensor(s), Faulty fuel injector(s), Stuck/blocked EGR valve / passages, Faulty camshaft position sensor, Defective computer.

The engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wire, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the the problems were faulty fuel injectors. 

Random misfires that jump around from one cylinder to another (read: P030x codes) also will set a P0300 code. The underlying cause is often a lean fuel condition, which may be due to a vacuum leak in the intake manifold or unmetered air getting past the airflow sensor, or an EGR valve that is stuck open.

Good luck and hope this information helps, keep me posted, be glad to help you get the truck running 100% again. Not sure if your running a K&N air filter, and if you are there may be a flim of oil on the MAF sensor that is making you run lean. You may want to spray down the MAF sensor with a can of MAF cleaner. 

Jul 02, 2009 | 2004 Dodge Ram 1500

2 Answers

98 camry engine light on w/misfires & system too lean


take sample of your fuel into clear plastic bottle from fuel line
is there any water present?
this can cause these codes and then not go on storing codes for other bank even though that bank will be missfiring also due to water & P0300 Random/Multiple Cylinder Misfire Detected being logged
check all connections to coils/leads & wiring connectors
due to miss fire codes for cyl 1,3,5 all on the same bank
also look and check for air leaks on that bank (hose knocked off or splithose)inlet manifold gasket,brake booster etc...
3 injectors being blocked slightly on same bank posible!!!
check wires and signal

was it running like this b4 tune up & repairs?
this is what codes are
P0170 Fuel Trim Malfunction (Bank 1)
P0300 Random/Multiple Cylinder Misfire Detected
P0301 Cylinder 1 Misfire Detected
P0303 Cylinder 3 Misfire Detected
P0305 Cylinder 5 Misfire Detected

the last code is for trans due to misfire/running lean on bank 1 probably a torque problem code
2e5d889.jpg

May 29, 2009 | 1998 Toyota Camry

3 Answers

Codes 1133-0131-0171-0300


p1133 - o2 sensor, Insufficiant Switching, Bank 1 Sensor 1.
p0131 - o2 sensor circuit, low voltage, bank 1 sensor 1
p0171 - Lean condition, Bank 1
p0300 - Random Misfire

I would be looking at the front passenger side oxygen sensor for issues. It may be bad, it may not be plugged in, bad wiring at harness.

The random misfire may be symptomatic of the o2 sensor problem.

Mar 17, 2009 | 2002 Chevrolet Silverado 1500

1 Answer

OBD II Scanner shows multiple random misfires and a lean 2nd bank


YOU MAY NEED TO CHANGE YOUR SPARKPLUGS AND PUT NEW ONES IN IT.

May 27, 2008 | 2004 Chevrolet Tahoe

Not finding what you are looking for?
1998 Chevrolet S-10 Pickup Logo

Related Topics:

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...