Question about 1991 Dodge Caravan

1 Answer

I just need to know what tools i would need to change a cv axle on a '91 dodge caravan

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

YOU WILL NEED A 12 MM. SOKET 17 M.M. 15MM 19 MM. 10 MM. AND FOR THE BIG NUT IN THE CENTER YOU WILL NEED 1 INCH 1/4 SOKET 1/2 INCH ZISE PLUS A BIG RACHED TO GET IT LOOSE

Posted on Jul 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My mechanic said that I need to replace my rubber seal on the axle on the right side of the gearbox, is this normal?


You didn't let us know what you drive but yes it is in cars with a lot of miles on it.
You might want to ask how much for a reman CV shaft and not just the boot.
Most shafts are below 100.00 now and the labor on changing a boot could well pass the price of a complete axle.

Nov 17, 2011 | 2005 Dodge Grand Caravan

1 Answer

1999 dodge caravan wont go int0 gear, but if i get the engine to around 8000 rpm the axle will turn, but van still wont move


have your cv joints checked, was there a grinding noise as you went around a corner before it died? if so, then it was the cv joints.

Feb 17, 2011 | 1999 Dodge Caravan

1 Answer

I have a dodge caravan 96. Motor is 3.3. I have a transmission leak. On the driver side of the transmission. I replace the seal, but the leak continue through the CV joint.


If it is leaking grease out of the cv joint, you will have to replace the rubber cv boot or eventually, the entire cv axle, if it gets worn because of lost grease and no lubrication.

Sep 22, 2010 | 1996 Dodge Caravan

1 Answer

How to change cv joint 94 dodge caravan


remove front wheel, remove nut on cv joint, next remove bolt from lower balljoint, break free to sperate balljoint from spindle, use a fork and hammer and a pry bar to pry lower arm out of the spindle, pull sindle back and slide axle out of hub, use wire to tie spindle back out of the way as far as it will go, caution of abs wire and brake hose, dont pull to far away, next use a long pry bar and go between back of axle joint and trany, give a quick pry to pop out of trany, to install new one apply grease to the lock ring on the end of axle that goes into trany, center the clip best you can, slide into trany then at other hit with a hammer you may want to put nut on so not to damage threads, you will feel axle pop in and lock, reverse order to put together. hope this helps.

Aug 31, 2010 | 1994 Dodge Caravan

1 Answer

HOW TO REPLACE INNER CV BOOT LEFT FRONT AXLE 1993 DODGE GRAND CARAVAN


You need to break the front suspension loose on that side and remove the drive axle.
I would replace the entire axle with a reman

Aug 03, 2010 | 1993 Dodge Grand Caravan

1 Answer

How do you change a cv joint on a 1992 dodge caravan? The right cv joint is out. Do we need to replace the right axel or can we just change the cv joint?


You need to replace the whole right side axle shaft. Take the ball-joint loose and the axle nut. Pull the shaft from the hub assembly and then pull it from the transmission

Mar 28, 2010 | Dodge Caravan Cars & Trucks

1 Answer

2000 Dodge Caravan tranmission started making a clicking sound only in 1st gear. Otherwise drives fine. What could be wrong?


you need to have the CV axle shafts checked,the clicking sound is the first sign of a bad one,you need to turn the steering wheel one way sharp wile accelerating,then the other way,so you can determine if left axle or right.

Jan 15, 2010 | 2001 Dodge Grand Caravan

1 Answer

How do i change the drivers side transaxle in a 1994 dodge carava


To change the CV axle, you have to remove the lower ball joint, remove the axle nut, remove from hub, (you can pull the strut out far enough to do this), and the axle will pull out. Install in reverse order. Sounds like you were trying to remove the transmission.

Jun 09, 2009 | 1994 Dodge Caravan

1 Answer

Shakes badly when it reaches 30mph


could be bad hub bearings, or cv axles. If the cv boots are ripped, replace the entire axles, both sides. if the cv boots are still intact then I would replace only the hub bearing assemblies.

Apr 21, 2009 | 1996 Dodge Caravan

1 Answer

95 dodge caravan


your kind of screwed because that is your spider gear pin. you will need to remove the differential unit and install the pin but probably need to replace the bolt that is supposed to hold that pin in place.

Dec 27, 2008 | 1995 Dodge Caravan

Not finding what you are looking for?
1991 Dodge Caravan Logo

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...